Details
This is a rechargeable Li-Po high discharge current battery with JST connector ready to plug to:
OLIMEXINO-328, OLIMEXINO-STM32, PIC32-PINGUINO, PIC32-PINGUINO-OTG, DUINOMITE and DUINOMITE-MEGA
The battery has overcharge and short circuit protection.
FEATURES
- Charge voltage 4.2V, nominal voltage 3.7V, cut-off voltage 3.0V
- Max charge current 1500mAh
- Max discharge current 3000mAh
- Impedance 60mOhm at 1KHz
- Operating temperature: at charge 0-55C, at discharge -25C+60C
- Capacity loss after 500 cycles full charge/discharge at 20C: 20%
- Dimensions 135 x 45 x 5 mm
Specifications
| Part. No. : | BATTERY-LIPO3000mAh |
Related Products
-
500146 RECHARGABLE LI-PO BATTERY 3.7V 1400mAh WITH JST CONNECTOR
This is rechargable Li-Po high discharge current battery with JST connector ready to plug to many Olimex development boards. -
500212 USB-uLiPo - USB LI-PO BATTERY CHARGER
A low cost and very compact Li-Po battery charger, based on Microchip MCP73833 with three status LEDs for displaying the battfalse -
500220 BATTERY-LIPO4400mAh
This is a rechargeable Li-Po high discharge current battery with JST connector. The battery has overcharge and short circuit false
Featured Products
|
ETH8020-B - 20 x 16A ethernet relay 
Excl. Tax:
€132.33
Incl. Tax:
€161.44
|
Excl. Tax:
€4.42
Incl. Tax:
€5.39
|
Customer Area
Compare Products
You have no items to compare.
Similar products
