582564 2595 - Pololu Logic Level Shifter, 4-Channel, Bidirectional

2595 - Pololu Logic Level Shifter, 4-Channel, Bidirectional

This tiny logic level shifter features four bi-directional channels, allowing for safe and easy communication between devices operating at different logic levels.
Categories
Prices are VAT included
€3.36 Price
€2.75 + VAT

 

Details

This tiny logic level shifter features four bi-directional channels, allowing for safe and easy communication between devices operating at different logic levels. It can convert signals as low as 1.5 V to as high as 18 V and vice versa, and its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including I²C, SPI, and asynchronous TTL serial

As digital devices get smaller and faster, once ubiquitous 5 V logic has given way to ever lower-voltage standards like 3.3 V, 2.5 V, and even 1.8 V, leading to an ecosystem of components that need a little help talking to each other. For example, a 5 V part might fail to read a 3.3 V signal as high, and a 3.3 V part might be damaged by a 5 V signal. This level shifter solves these problems by offering bidirectional voltage translation of up to four independent signals, converting between logic levels as low as 1.5 V on the lower-voltage side and as high as 18 V on the higher-voltage side, and its compact size and breadboard-compatible pin spacing make it easy to integrate into projects.

The logic high levels on each side of the shifter are achieved by 10 kΩ pull-up resistors to their respective supplies; these provide quick enough rise times to allow decent conversion of fast mode (400 kHz) I²C signals or other similarly fast digital interfaces (e.g. SPI or asynchronous TTL serial). External pull-ups can be added to speed up the rise time further at the expense of higher current draw. See the schematic diagram below for more information.

Features

  • Dual-supply bus translation:
    • Lower-voltage (LV) supply can be 1.5 V to 7 V
    • Higher-voltage (HV) supply can be LV to 18 V
  • Four bidirectional channels
  • Small size: 0.4″ × 0.5″ × 0.08″ (13 mm × 10 mm × 2 mm)
  • Breadboard-compatible pin spacing

This logic level converter requires two supply voltages: the lower-voltage logic supply (1.5 V to 7 V) connects to the LV pin and the higher-voltage supply (LV to 18 V) connects to the HV pin. The HV supply must be higher than the LV supply for proper operation. Logic low voltages will pass directly from Hx to the corresponding Lx (and vice versa), while logic high voltages will be converted between the HV level to the LV level as the signal passes from Hx to Lx or Lx to Hx.

The level shifter circuit does not require a ground connection to either device, so there are no ground pins on the board. (Some competing level shifter modules provide ground connections that simply act as a pass-through; we have opted to leave these off and make the board smaller.) The two devices being connected through the level shifter must still share a common ground.

Included hardware

A 0.1″-pitch male header strip is included for use with this board. The strip can be broken into smaller pieces and soldered in so the board can be used with perfboards, breadboards, or 0.1″ female connectors. Alternatively, wires can be soldered directly to the board for more compact installations. The connections are labeled on the back side of the of the PCB, so you might find it more convenient to solder the pins in the way that allows the labeled side to be facing up.

The logic level conversion is accomplished with a simple circuit consisting of a single n-channel MOSFET and a pair of 10 kΩ pull-up resistors for each channel. When Lx is driven low, the MOSFET turns on and the zero passes through to Hx. When Hx is driven low, Lx is also driven low through the MOSFET’s body diode, at which point the MOSFET turns on. In all other cases, both Lx and Hx are pulled high to their respective logic supply voltages. External pull-ups can be added to speed up the rise time. This same circuit is detailed in NXP’s application note on I²C bus level-shifting techniques, and we have used it before on carrier boards for 3.3 V sensors with I²C interfaces – like the MinIMU-9 – to enable them to work directly with both 3.3 V and 5 V systems.

Specifications

Part. No. : 2595

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on 2595 - Pololu Logic Level Shifter, 4-Channel, Bidirectional

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Logic level converter - 8 channels - Bidirectional

    501395 Logic level converter - 8 channels - Bidirectional

    Bidirectional level converter based on TXB0108 integrated circuit
    Excl. Tax:
    €8.70
    Incl. Tax:
    €10.61
      Compare
  2. Logic Level Converter Bi-Directional

    712009 Logic Level Converter Bi-Directional

    The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3false
    Excl. Tax:
    €2.70
    Incl. Tax:
    €3.29
      Compare
  3. SparkFun Logic Level Converter - Single Supply

    714765 SparkFun Logic Level Converter - Single Supply

    The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3false
    Excl. Tax:
    €17.47
    Incl. Tax:
    €21.31
      Compare