This simple board breaks out all five pins of a USB Micro-B connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1″ connectors
This board breaks out the VBUS, GND, D-, D+, and ID pins of a USB Micro-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB differential data signals. Each of these pins, along with the ID pin, are broken out into a 1×5 row of 0.1″-spaced pins on the board. The included 1×5 straight male header can be soldered to these pins to allow the board to be used with standard perfboards, solderless breadboards, and 0.1″ connectors.
This tiny unit measures only 0.35″ × 0.6″ (0.4″ × 0.6″ including its USB Micro-B connector) and has two 0.086″ diameter semi-circular cutouts for mounting with #2 or M2 screws.
|Part. No. :||2586|
Use spaces to separate tags. Use single quotes (') for phrases.
Questions on USB Micro-B Connector Breakout Board
No questions asked yetRegister or Login to ask a question.
- Teensy (Arduino)
- Grove (Arduino)
- Raspberry PI
- Sockets, Strips & Jumpers
- Embedded Linux
- Voice and Sound
- Radio & Wireless
- Display & LED
- Robot Kits
- Mechanics and Materials
- DYNAMIXEL Servos
- Stepper Motors
- Motor & Servo Controllers
- Garage Sale
You have no items to compare.
MiniPOV 4 Kit - DIY Full-Color POV and Light Painting Kit
Excl. Tax:€26.57Incl. Tax:€32.42
Out of stock
Adafruit I2C Non-Volatile FRAM Breakout - 256Kbit / 32KByte
Excl. Tax:€11.60Incl. Tax:€14.15
Out of stock