Details
The SparkFun gator:starter ProtoSnap is one of a series of gator-clippable accessories called gator:boards that have been created to directly interface with the micro:bit or to other micro controllers! The gator:starter ProtoSnap provides you with a starting point to go beyond the capabilities of the micro:bit, with three different boards that can be kept as a whole or broken apart for individual use!
Included on each gator:starter is a temperature sensor board, a light sensor board and an RGB LED board. Since this is a ProtoSnap, we’ve broken out the power so it can be clipped to on the edge of the gator:starter to power the board without breaking each individual sensor or LED. Snapping the board apart can be easily done by twisting each of the LED boards side to side until it pops out and will need to be done if you want to light any of the LEDs on their own.
There are also power tabs available on the two sensors and the LED if you choose to break the gator:starter into its basic components. If you don’t break the board apart however, you’ll still be able to interface with all of the sensor and light pins, which are broken out with a dual hole design to allow clipping from above.
Included on the ProtoSnap
- 1x gator:temperature Board (MCP9700)
- 1x gator:light Board (TEMT6000)
- 1x gator:RGB Board
Specifications
Part. No. : | SEN-14891 |
Questions on SparkFun gator:starter ProtoSnap
No questions asked yet
Register or Login to ask a question.Related Products
-
712978 Alligator Test Leads - Multicolored (10 Pack)
Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workfalse -
700508 Banana to Alligator Coax Cable
These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High qfalse -
809055 Small Alligator Clip Test Lead (Set of 18)
Connect this to that without soldering using these mini alligator clip test leads. 15" cables with alligator clip on eacfalse -
714968 SparkFun gator:control ProtoSnap
Scheda studiata per la connessione rapida con i cavi a coccodrillo. Funziona con Micro:bit, arduino e tutti i microcontrollorfalse