Details
This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button.
Each button has a conductive circle backing so that a switch can be created with exposed PCB traces. Button force is between 190 and 210grams activation force (nice tactile feel like on your TV remote).
- Dimensional Drawing (2x2 section only)
Questions on Button Pad 2x2 - LED Compatible
No questions asked yet
Register or Login to ask a question.Related Products
-
882009 Keypad 3x4
3 by 4 Keypad. (Telephone-type) -
450010 Hex Matrix keypad
Hex Matrix Keypad. Pushbuttons are arranged in 4 rows and 4 columns -
708746 Button Pad 2x2 Top Bezel
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. -
708747 Button Pad 2x2 Bottom Bezel
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. -
709277 Button Pad 2x2 - Breakout PCB
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors afalse -
708033 Button Pad 4x4 - Breakout PCB
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors afalse -
700105 LED - RGB Clear Common Cathode
These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for thfalse -
707835 Button Pad 4x4 - LED Compatible
This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org.