Details
The metal D-645MW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Specifications
| Motor Type: | 3 Pole |
| Bearing Type: | Dual Ball Bearing |
| Speed (4.8V / 6.0V / 7.4V): | 0.28 / 0.20 / 0.17 sec/60º |
| Torque oz-in (4.8V / 6.0V / 7.4V): | 115 / 158 / 180 oz-in |
| Torque kg-cm (4.8V / 6.0V / 7.4V): | 8.3 / 11.4 / 13.0 kg-cm |
| Size in Inches: | 1.59 x 0.77 x 1.48 in |
| Size in Millimeters: | 40.6 x 19.8 x 37.8 mm |
| Weight oz: | 2.11 oz |
| Weight g: | 59.8 g |
Specifications
| Part. No. : | 36085 |
| Form Factor : | Micro |
| Gears : | Metal |
| Ball Bearings : | Yes |
| Electronics : | Digital |
| Voltage (V) : | 4.8-7.4V |
| Interface : | RC Standard |
| Torque : | 4.3 Kg/cm |
| Raw Torque : | 4 Kg/cm |
| Dimensions (mm) : | 29 x 13 x 30 mm |
| Weight (gr) : | 24 g |
Questions on D85MG D-Series Micro Digital Servo
No questions asked yet
Register or Login to ask a question.Related Products
-
33045 Hitec HS45HB Micro Servo
Featuring our new revolutionary "Karbonite" gear train. Karbonite is four times stronger than our standard white nyfalse -
32082 HS-82MG Standard Metal Gear Micro Servo
Based on the ultra popular HS-81MG the HS-82MG gets a new stronger motor and updated electronics for more precise centering.
|
0.4mm Heat Resistant Welding Wire (Black) 
Excl. Tax:
€11.00
Incl. Tax:
€13.42
|
Excl. Tax:
€4.42
Incl. Tax:
€5.39
|
You have no items to compare.
