Details
This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button.
16 button pad can be split up into four, 4 button pads. Each button has a conductive circle backing so that a switch can be created with exposed PCB traces. Button force is between 190 and 210grams activation force (nice tactile feel like on your TV remote).
This product is for the white rubber only. If you need the LEDs, PCB, or black bezel, please see below.
Documents:
Questions on Button Pad 4x4 - LED Compatible
No questions asked yet
Register or Login to ask a question.Related Products
-
882009 Keypad 3x4
3 by 4 Keypad. (Telephone-type) -
450010 Hex Matrix keypad
Hex Matrix Keypad. Pushbuttons are arranged in 4 rows and 4 columns -
707836 Button Pad 2x2 - LED Compatible
This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. -
708746 Button Pad 2x2 Top Bezel
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. -
708747 Button Pad 2x2 Bottom Bezel
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. -
709277 Button Pad 2x2 - Breakout PCB
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors afalse -
708033 Button Pad 4x4 - Breakout PCB
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors afalse -
700105 LED - RGB Clear Common Cathode
These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for thfalse