Details
The S9V11MA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage
The S9V11x family of efficient switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) use a buck-boost topology to convert both higher and lower input voltages to a regulated output voltage. They take input voltages from 2 V to 16 V and increase or decrease them as necessary, offering a typical efficiency of over 85% and a typical output current of up to 1.5 A. The flexibility in input voltage offered by this family of regulators is especially well-suited for battery-powered applications in which the battery voltage begins above the regulated voltage and drops below as the battery discharges. Without the typical restriction on the battery voltage staying above the required voltage throughout its life, new battery packs and form factors can be considered.
The different members of this family offer different output voltage options, from fixed voltages with selectable alternatives to adjustable voltages that can be set anywhere between 2.5 V and 9 V using a precision 12-turn potentiometer. Some versions also have an adjustable low-voltage cutoff that can be set anywhere in the 2 V to 16 V output voltage range and used to prevent your battery from over-discharging. This is particularly useful for battery chemistries that can be damaged when over-discharged, including Li-ion and LiPo.
Details for item #2869
Features
- Input voltage: 2 V to 16 V (note: this regulator requires 3 V to start, but it can operate down to 2 V after startup)
- Output voltage: 2.5 V to 9 V (precision-adjustable using built-in 12-turn potentiometer)
- Typical maximum continuous output current: 1.5 A (when input voltage is close to the output; the Typical efficiency and output current section below shows how the achievable continuous output current depends on the input and output voltages)
- Power-good indicator can be used to tell when the regulator has reached and is maintaining its target output voltage
- Power-saving feature maintains high efficiency at low currents (quiescent current is less than 1 mA while enabled and approximately 7 µA per volt on VIN when regulator is disabled)
- Integrated over-temperature and short-circuit protection
- Small size: 0.5″ × 0.6″ × 0.25″ (12.7 × 15.3 × 6.4 mm)
Using the Regulator
During normal operation, this product can get hot enough to burn you. Take care when handling this product or other components connected to it.
Dimensions
Size: | 0.5″ × 0.6″ × 0.25″1 |
---|---|
Weight: | 0.8 g1 |
General specifications
Minimum operating voltage: | 2 V2 |
---|---|
Maximum operating voltage: | 16 V |
Maximum output current: | 1.5 A3 |
Minimum output voltage: | 2.5 V4 |
Maximum output voltage: | 9 V4 |
Reverse voltage protection?: | N |
Maximum quiescent current: | 1 mA5 |
Identifying markings
PCB dev codes: | reg20b |
---|---|
Other PCB markings: | 0J10534 |
Notes:
- 1
- Without included optional headers.
- 2
- Note: the minimum startup voltage is 3V, but the regulator can operate down to 2V after startup.
- 3
- Under typical conditions, where the input voltage is close to the output voltage. Maximum output current can be higher when stepping down and lower when stepping up.
- 4
- Output voltage is set by a built-in precision 12-turn potentiometer.
- 5
- With no load. Actual quiescent current depends on input voltage; it is typically under 300 µA when the input voltage is close to the output voltage.
Specifications
Part. No. : | 2869 |
Questions on 2869 - 5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA
No questions asked yet
Register or Login to ask a question.Related Products
-
582119 2119 - Pololu Step-Up/Step-Down Voltage Regulator S7V7F5
The S7V7F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.7 and 11.8 V. Its abifalse -
582560 2560 - Pololu Adjustable Step-Up Voltage Regulator U1V11A
This compact U1V11A switching step-up (or boost) voltage regulator efficiently boosts input voltages as low as 0.5 V to an adfalse -
342868 2868 - 2.5-9V Fine-Adjust Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11MACMA
The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whfalse -
342870 2870 - 5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA
The S9V11F5S6CMA switching step-up/step-down regulator efficiently produces a fixed 5 V (default) or 6 V (selectable) output false -
342871 2871 - 3.3V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F3S5CMA
The S9V11F3S5CMA switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) outpufalse -
343782 3782 - 5V, 3.2A Step-Down Voltage Regulator D36V28F5
Piccolo regolatore step-down switching con uscita 5V con potenza da 2.5 a 4A in relazione alla tensione di ingresso. Accetta false -
343786 3786 - 12V, 2.4A Step-Down Voltage Regulator D36V28F12
Piccolo regolatore step-down switching con uscita 12V con potenza da 2.5 a 3.3A in relazione alla tensione di ingresso. Accetfalse -
343781 3781 - 3.3V, 3.6A Step-Down Voltage Regulator D36V28F3
Piccolo regolatore step-down switching con uscita 3.3V con potenza da 3.2 a 4.5A in relazione alla tensione di ingresso. Accefalse -
344095 4095 - 12V, 4.5A Step-Down Voltage Regulator D36V50F12
Piccolo regolatore step-down switching con uscita 12V con potenza da 2.3 a 6.5A in relazione alla tensione di ingresso. Accetfalse -
344091 4091 - 5V, 5.5A Step-Down Voltage Regulator D36V50F5
Piccolo regolatore step-down switching con uscita 5V con potenza da 3.5 a 8A in relazione alla tensione di ingresso. Accetta false -
344090 4090 - 3.3V, 6.5A Step-Down Voltage Regulator D36V50F3
Piccolo regolatore step-down switching con uscita 3.3V con potenza da 4.5 a 9.5A in relazione alla tensione di ingresso. Accefalse -
342839 2839 - Charge Pump Voltage Inverter: 1.8-5.3V, 60mA
Scheda che converte tensioni da 1.8 a 5.3V nella relativa tensione negativa con un'efficienza dell 80% e una corrente massimafalse