Details
Controlled over WIFI using preprogrammed command sets or html page.
The ESP32LR20 is a WIFI connected relay module using the popular ESP32. It provides 2 relays capable switching up to 16Amps. The normally open relay contacts have snubbers fitted across them, and can drive inductive loads such as contactors and solenoids. Power for the board is 12v dc, which can be provided by a standard universal wall power supply. A 1A or greater supply should be selected.
Control Protocols
1. Simple plain text commands sent to the module.
2. HTML commands
3. MQTT
4. A built in webpage
Relays - 2 with snubbers for inductive loads
Power - 12V DC adaptor, supplied separately
Control interface - HTTP (webpage), HTML commands, MQTT commands or plain text commands (ASCII terminal)
Relay current - Up to 16Amp @24vdc or 250vac
Output connections - Screw Terminals for N/O N/C and Common contacts.
Programming connection - USB programmable with Arduino IDE
Built around the ESP-WROOM-32, the module is fully customisable around open source software.
Specifications
| Part. No. : | ESP32LR20 |
| Interface : | WiFi |
| Relays : | 2 |
Questions on ESP32LR20 - WIFI 2 x 16A relays
No questions asked yet
Register or Login to ask a question.Related Products
-
807759 WIFI484 - 4 Relays at 16A, 8 Digital IO and 4 Analogue Inputs
The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analfalse -
808407 WIFI002 - 2 Relays at 16A
The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from false -
808408 WIFI008 - 8 Relays at 16A
The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from false -
808866 dS378 - 8 x 16A ethernet relay
Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modbus protocols. Send email notififalse -
809230 ESP32LR88 - WIFI 8 x 16A relays
ESP32LR88 - Scheda WiFi con modulo ESP32, con 8 Rele' da 16A e 8 ingressi digitali. Utilizzabile anche con carichi induttivi false -
809254 ESP32LR42 - WIFI 4 x 16A relays
ESP32LR42 - Scheda WiFi con modulo ESP32, con 4 Rele' da 16A e 2 ingressi digitali. Utilizzabile anche con carichi induttivi false -
882011 XE1201 - Snubber
Componente RC utilizzato per sopprimere i transienti che si verificano nei Rele' quando si pilotano carichi induttivi. Prolunfalse -
809445 ESP32SR88 - WIFI 8 x 1A relays
ESP32LR88 - Scheda WiFi con modulo ESP32, con 8 Rele' da 16A e 8 ingressi digitali.
|
VCP4114 - Clip-on Current Transducer 25A 
Excl. Tax:
€18.00
Incl. Tax:
€21.96
|
|
Teensy Audio Board Rev. D (Teensy 4.0) 
Excl. Tax:
€14.40
Incl. Tax:
€17.57
|
You have no items to compare.
