Details
This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~50k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.
The overall length is about 2.25". The sensor comes with a 0.1" spaced, reinforced, breadboard friendly connector.
Documents:
Questions on Flexiforce Pressure Sensor - 25lbs (1" area)
No questions asked yet
Register or Login to ask a question.Related Products
-
709674 Force Sensitive Resistor L=600mm
This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. -
807800 Force-Sensing Resistor: 0.6″-Diameter Circle, Short Tail
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance whfalse -
807801 Force-Sensing Linear Potentiometer: 1.4″×0.4″ Strip
This force-sensing linear potentiometer (FSLP) from Interlink Electronics is a passive component with resistances that dependfalse -
807802 Force-Sensing Linear Potentiometer: 4.0″×0.4″ Strip, Customizable Length
Force-sensing linear potentiometers (FSLPs) from Interlink Electronics are passive components with resistances that depend onfalse -
807803 Force-Sensing Resistor: 0.25″-Diameter Circle, Short Tail
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance whfalse -
708685 Flexiforce Pressure Sensor - 100lbs.
This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, tfalse -
714194 Amphenol FCI Clincher Connector (2 Position, Female)
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard hfalse -
804258 Adafruit LPS35HW Water Resistant Pressure Sensor
Sensore di pressione assoluta e relativa, basato su chip LPS35HW, impermeabile, con interaccia SPI e I2C
|
Raspberry Pi 4 Model B board with 4GB LPDDR4 SDRAM 
Excl. Tax:
€59.70
Incl. Tax:
€72.83
|
|
0.4mm Heat Resistant Welding Wire (Red) 
Excl. Tax:
€11.00
Incl. Tax:
€13.42
|
You have no items to compare.
-
Force-Sensing Resistor: 0.25″-Diameter Circle, Short Tail
Excl. Tax:€6.20Incl. Tax:€7.56Out of stock
-
-
-
Force-Sensing Resistor: 0.6″-Diameter Circle, Short Tail
Excl. Tax:€7.21Incl. Tax:€8.80Out of stock
