420116 Gearmotor 12Vdc 33RPM Encoder

SIX POLES MAGNET:THREE PULSES FOR MOTOR TURN HALL-EFFECT SWITCHES

These Hall-effect switches are highly tempertature stable and stress-resistant sensors best utilized in applications that provide steep magnetic slopes and low residual levels of magnetic flux density. Each device includes a voltage regulator, quadratic Hall voltage generator, temperature stability circuit, signal amplifier, Schmitt trigger and open collector output on a single silicon chip. The on-board regulator permits operation with supply voltages of 4,5 to 24 V. The switch output can sink up to 20 mA with suitable output pull up, they can be used directly with bipolar or MOS logic circuits.

• VDR interference suppression on the collector
• Direction of rotation depending on polarity
• Can be mounted in any position
• Maximum radial shaft load: 50N
• Maximum axial shaft load: 10N
• Temperature range: -20°C/60°C
• Works with: Motor Mind B and the 3A Motor Controller

Encoder Connections: Red: + Motor 3 Blue: Out 2 Green: GND 1 Brown: Vcc (Hall) Black: - Motor