807812 Grove - EMG Detector

Grove - EMG Detector

EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control system.
Categories
Prices are VAT included
€35.38 Price
€29.00 + VAT

 

Details

EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control system. Note: The sensor cannot be used for medical purposes.
In standby mode, the output voltage is 1.5V. When detect muscle active, the output signal rise up, the maximum voltage is 3.3V. You can use this sensor in 3.3V or 5V system.
 
Features: 
  • Grove Compatible 
  • 3.5mm Connector
  • 6 Disposable Surface Electrodes
  • Power supply voltage: 3.3V-5V
  • 1000mm Cable Leads
  • No additional power supply
 
Move 
When finish downloading demo code, it'll take about 5s to initialize, you should keep static when initializing.
You can see that when initializing, the Led Bar will go form level 10 to level 0. When Led Bar All off, you can move now. 
When you are moving, you can find that the level of Led Bar will change.
Resource
 
Documents
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.

Specifications

Part. No. : 811006001
Interface : n/a
Voltage : 5

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on Grove - EMG Detector

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)

    115124 Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)

    The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse
    Excl. Tax:
    €2.83
    Incl. Tax:
    €3.45
      Compare
  2. SHIELD-EKG-EMG - ELECTROCARDIOGRAPHY ELECTROMYOGRAPHY SHIELD

    500221 SHIELD-EKG-EMG - ELECTROCARDIOGRAPHY ELECTROMYOGRAPHY SHIELD

    This is an EKG/EMG shield which allows Arduino like boards to capture Electrocardiography Electromiography signals.
    Excl. Tax:
    €20.00
    Incl. Tax:
    €24.40
      Compare
  3. SHIELD-EKG-EMG-PA - PASSIVE ELECTRODES FOR ELECTROCARDIOGRAPHY ELECTROMIOGRAPHY SHIELDS

    500222 SHIELD-EKG-EMG-PA - PASSIVE ELECTRODES FOR ELECTROCARDIOGRAPHY ELECTROMIOGRAPHY SHIELDS

    This is a passive electrode for a SHIELD-EKG-EMG shield which allows Arduino like boards to capture Electrocardiography Electfalse
    Excl. Tax:
    €10.00
    Incl. Tax:
    €12.20
      Compare