Details
The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter. The IR detector have a demodulator inside that looks for modulated IR at 38 KHz. The Infrared Receiver can receive signals well within 10 meters. If more than 10 meters , the receiver may not get the signals. We often use the two Twigs-the Infrared Receiver and the Infrared Emitter to work together.
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
Specifications
Part. No. : | 101020016 |
Related Products
-
700241 Infrared Emitters and Detectors
Side-looking Infrared Emitters and IR Detectors. These simple devices operate at 940nm and work well for generic IR systems ifalse -
115121 Grove - Universal 4 Pin Buckled 20cm Cable (5 PCs pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
115124 Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
115220 Grove - Infrared Emitter
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to getfalse -
120347 Infrared Photoelectric Switch
Sensori fotoelettrici, composti da emettitore e ricevitore, lavorano ad una distanza max di 1.5metri, reagiscono quando il fafalse -
120368 Non-contact Capacitive Liquid Level Sensor
Sensore per rilevamento di livello di un liquido attraverso un contenitore non metallico. Sensibilita' regolabile. Uscita on/off