The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the measured voltage drop. If you place a resistor from the output of the INA169 to ground, you can measure the voltage at the output.
Input common-mode and power supply voltages are independent and can range from 2.7V to 60V on the INA169 and quiescent (sleep) current is only 60uA.
- Eagle Files
- Datasheet (INA169)
- Hookup Guide
|Part. No. :||SEN-12040|
Questions on INA169 Current Sensor Breakout
No questions asked yetRegister or Login to ask a question.
712052 LTC4150 Coulomb Counter BreakoutThis breakout is capable of constantly monitoring the current your sensor is using, is able to add it up, and will give you afalseExcl. Tax:€10.52Incl. Tax:€12.83
712918 Breakout Board for MCP4725 I2C DACThe MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wafalseExcl. Tax:€5.15Incl. Tax:€6.28
344041 4041 - ACS724 Current Sensor Carrier -5A to +5ASensore di corrente bidirezionale ad effetto di Hall con chip Allegro ACS724LLCTR-05AB +/-5A per sistemi a 5VExcl. Tax:€9.19Incl. Tax:€11.21
344760 4760 - Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18VEncoder a quadratura per micromotori con asse posteriore sporgente, inclusa versione HPCBExcl. Tax:€7.65Incl. Tax:€9.33