Light pipe is very cool stuff. It transmits light along its length, like fiber optic cable, but it also "leaks" light along the way, causing the entire length of tubing to light up when a bright light is shined into one end. It can be easily cut to length with a pair of scissors or a knife and by using a piece of shrink-tube to attach a super bright LED to one end, you can produce an EL-like effect.
Light pipe is great for decorative applications, you could even sew it into an e-textile project. It's also a good way to 're-route' an indicator light that's buried inside an enclosure, so that it's visible on the surface. Putting different colored LEDs at either end produces some very cool effects as well!
This is a 1 foot length of 6mm diameter light pipe. This light pipe has a white core that reflects light out and makes it visible in slightly brighter conditions. It can be easily connected to a basic 5mm LED with a length of shrink tubing or some tape. This works great with our super bright LEDs.
Use spaces to separate tags. Use single quotes (') for phrases.
Questions on Light Pipe - White core - L=150cm D=6mm
No questions asked yetRegister or Login to ask a question.
- Teensy (Arduino)
- Grove (Arduino)
- Raspberry PI
- Sockets, Strips & Jumpers
- Embedded Linux
- Voice and Sound
- Radio & Wireless
- Display & LED
- Robot Kits
- Mechanics and Materials
- DYNAMIXEL Servos
- Stepper Motors
- Motor & Servo Controllers
- Garage Sale
You have no items to compare.
OctoWS2811 Adapter for Teensy 3.1 - Control tons of NeoPixels!
Excl. Tax:€10.57Incl. Tax:€12.90
Adafruit 12-Channel 16-bit PWM LED Driver - SPI Interface - TLC59711
Excl. Tax:€8.16Incl. Tax:€9.96
Out of stock