Details
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied on the sensor, more current will flow from the board through the signal tab to the microcontroller you connect the sensor to. If the sensor receives no light, no current will flow through it. In a typical indoor lighting situation, the sensor will output around 1 to 2V. Adding this board into your next e-textile or wearable project will really open up the possibilities by being able to incorporate light level sensing capabilities.
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.
- 20mm outer diameter
- Thin 0.8mm PCB
Specifications
Part. No. : | DEV-14629 |
Interface : | I/O |
Voltage : | 3.3 |
Shield Type : | Sensors |
Related Products
-
710274 LilyPad Arduino Simple Board
This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins thanfalse -
713343 LilyPad Reed Switch
The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactlfalse -
713903 LilyPad Rainbow LED (6 Colors)
The LilyPad Rainbow LED features seven individual LEDs in six unique colors (Red, Blue, Green, Yellow, Pink, and White). -
714528 LilyPad E-Sewing ProtoSnap Kit
The LilyPad E-Sewing ProtoSnap Kit is a great way to incorporate buttons and switches into an e-textile project without any pfalse -
715123 SparkFun RedBoard Qwiic
The RedBoard combines the simplicity of the UNO's Optiboot bootloader (which is used in the Pro series), the stability of thefalse -
715436 SparkFun Ambient Light Sensor - VEML6030 (Qwiic)
Sensore di luminosita' per luce ambientale basato sul VEML6030, chip con elevata accuratezza a 16bit. Connettore Qwiic -
715441 SparkFun Lightning Detector - AS3935
Sensore di fulmini. E' in grado di rilevare fulmini lontani 40Km con un'accuratezza di 1Km mediante un'antenna ben regolata, false -
715219 SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 & MAX32664 (Qwiic)
Sensore avanzato di Battito Cardiaco e Pulsiossimetro, compatibile con il sistema Qwiic