Details
MOD-OLED-128x64 is low cost, low power, high contrast LCD display with UEXT connector. You can control it via I2C. The power supply required is only in range 1 uA in sleep mode, 200 uA in operating mode and 7mA in display ON mode. View area is 21 x 11 mm. 4 pin header is provided and can be soldered by user to use MOD-OLED-128x64 with breadboard.
FEATURES
- UEXT connector
- UEXT female-female cable included
- 4 pin header for breadboard
- 27x11 mm view area
- High contrast
- I2C controllable
- 3.3V power supply line (4V absolute maximum)
- 7 mA current with display ON, 1uA sleep mode
HARDWARE
Specifications
Part. No. : | MOD-OLED-128x64 |
Shield Type : | Display |
Interface : | I2C |
Questions on MOD-OLED-128x64 OLED DISPLAY MODULE 27X11MM SIZE AND I2C CONTROL
No questions asked yet
Register or Login to ask a question.Related Products
-
712923 MicroView - OLED Arduino Module
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a builtfalse -
713003 SparkFun Micro OLED Breakout
This breakout is perfect for adding graphics to your next Arduino project, displaying diagnostic information without resortinfalse -
808530 Monochrome 2.42" 128x64 OLED Graphic Display Module Kit
These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display.The driver chip, SSD130false -
713628 SparkFun Photon Micro OLED Shield
The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system false -
808584 FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards
FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. -
808884 OLED Breakout Board - 16-bit Color 1.5" w/microSD holder
This OLED uses the SSD1351 driver chip, which manages the display. You can talk to the driver chip using 4-wire write-only SPfalse -
714532 SparkFun Micro OLED Breakout (Qwiic)
The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions, that hasfalse -
714059 SmartiPi Touch
The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into false -
714074 SparkFun 20x4 SerLCD - Black on RGB 3.3V
Display seriale basato su chip AVR, e' una soluzione semplice ed economica per aggiungere un Display RGB 20x4 a qualsiasi profalse