- STM32F103RBT6 microcontroller
- DCDC power supply allow power input voltage from 9 to 30V DC thus making possible to take virtually any power supply adapter on the market, also enable application which are in industrial power supply 24VDC.
- carefully selected all components to work reliable inINDUSTRIAL temperature range -25+85C so the board can be used in INDUSTIRAL applications.
- ULTRA LOW POWER voltage regulators and the consumption is only few microamps, which enables handheld and battery powered applications.
- Li-Ion rechargable battery power supply option with BUILD-IN on board charger, so when you attach battery it is automatically charged and kept in this state until the other power source (USB or external adapter) is removed and it AUTOMATICALLY will power the board - no jumpers, no switches!
- UEXT connector which allow many existing modules like RF, ZIGBEE, GSM, GPS to be connected
- allow RTC - Real Time Clock.
- CAN with driver allows automotive applications
- micoSD-card for data logging
- NOISE IMMUNE design.
- Separate voltage regulator for the Analog part, which allow the ADC to be read correctly without the digital noise pickup.
- Optionally if someone need higher precision and temperature stability in Analog reading we have provision on the board for Aref preciese source.
- the LEDs and the BUTTONs are on the edge of the board so there is easy access even if the boards have shields on them
- all components are LOWER than the connectors, so the shields do not interference with them
- mini USB connector is used which is common and used in most cell phones, so you do not have to buy other cables
- original Arduino design had flaw and the connectors were not spaced at 0.1" this make perfo board use impossible, to keep the compatibility we have same spacing but we add next to this connector on 0.1" which customer can use with perforated boards
- all signals on the connectors are printed on top and on bottom of the board, so when you check with probe you know exactly which port you are measuring
- 4 mount holes make board attachment easier
- OLIMEXINO-STM32 REV.A schematic in PDF format
- OLIMEXINO-STM32 REV.B schematic in PDF format
- OLIMEXINO-STM32 REV.D schematic in PDF format
- OLIMEXINO-STM32 revision A Eagle board and schematic files released under Creative Commons Attribution-Share Alike 3.0 United States License
- OLIMEXINO-STM32 revision B Eagle board and schematic files released under Creative Commons Attribution-Share Alike 3.0 United States License
- OLIMEXINO-STM32 revision D Eagle board and schematic files released under Creative Commons Attribution-Share Alike 3.0 United States License
- Maple example for EKG capture and interface to Electric Guru for OLIMEXINO-STM32
- Blink interrupt blink demo code
- Button event demo code
- Olimexino CAN example (not for Arduino) - NEW refer to the readme inside for more info
- OLIMEXINO-STM32 and MOD-IRDA - refer to the readme inside for more info
- OLIMEXINO-STM32 and MOD-GPS - example v1.0
- SDCARD library and examples - Maple SDCARD_Lib + Examples MapleIDE leaflabs forums
- OLIMEXINO-STM32 + MOD-SMB380 - OLIMEXINO-STM32 + Accelerometer - check the readme inside for explanation
- - the board reads temperature with MOD-TC and thermocouple
- OLIMEXINO-STM32 and MOD-MAG demo - the board reads Earth's magnetic field with MOD-MAG
- OLIMEXINO-STM32 and LOL-SHIELD demo v1.1 - refer to the readme inside of the package
- We're working on a design using the OLIMEXINO-STM32 board for an automotive application. Should we need to add additional protection on the power supply input or the current protection is OK for automotive use?
- When we designed OLIMEXINO-STM32 we wanted create Industrial not Automotive board, so if you want to use it in Automotive application you have to add 18V TVS or Varistor on the power supply input.
- I have problem connecting the device to Windows 7 Embedded device.
- The embedded version misses the driver usbser.sys from system32/drivers folder.
Questions on Olimexino STM32 - Maple-like board
No questions asked yetRegister or Login to ask a question.
Excl. Tax:€6.90Incl. Tax:€8.42