Six Versatile I/O Ports
With a VINT Hub Phidget, you can interface six devices to your computer through a single USB port. Each VINT port can perform one of four roles: Communicating with an intelligent VINT Device, reading a 0-5V Voltage or ratiometric sensor, acting as a digital output, or reading switches as a digital input. Each port has a power and ground pin, so you can also use the ports to gain access to the USB voltage supply directly.
Plug in one of our many VINT-enabled Phidgets that perform a wide variety of functions. Control motors and LEDs, measure temperature or motion, or build a large scale system with many inputs and outputs.
Easy to Use
VINT Devices are 'plug and program': automatically discovered by the Phidget API with the same ease of programming you've come to expect from Phidgets. Each VINT device has a full API with functions and events to make programming a snap.
Analog Sensor Compatible
Sometimes, you just need a few simple analog voltage sensors. Luckily, your collection of Phidget Analog Input sensors is not obsolete; each port on the USB VINT Hub can interface a 0-5V sensor. The VINT Port is backwards compatible with both ratiometric and non-ratiometric Phidget analog sensors.
Digital I/O Mode
In digital output mode, a VINT port can be used to drive LEDs, relays, digital circuits, and other simple electronics. Each port is PWM-enabled, allowing you to dim LEDs to a specific brightness.
Wire a switch or sensor contact directly into a VINT Port, and use the Digital Input mode to read the state of the switch.
If you need more than six inputs or outputs, you can expand by attaching a VINT I/O module. For example, there are VINT digital output modules with 16 outputs, allowing 96 digital outputs on a single VINT HUB Phidget! See the "Compatible Products" tab for a list of modules.
|Number of VINT Ports||6|
|USB Voltage Min||4.5 V DC|
|USB Voltage Max||5.3 V DC|
|USB Speed||High Speed|
|Current Consumption Min||32.5 mA|
|Available External Current||470 mA|
|Voltage Input Resolution||* 16 bit|
|Sensor Input Impedance||324 kΩ|
|Input Voltage Min (DC)||0 V DC|
|Input Voltage Max (DC)||5 V DC|
|Voltage Input Noise||± 630 μV DC|
|Sampling Interval Max||60 s/sample|
|Number of Voltage Inputs||6 (Shared)|
|Sampling Interval Min||1 ms/sample|
|Voltage Noise||1.3 mV DC|
|Pull-up Resistance||124 kΩ|
|Low Voltage Max (True)||1 V DC|
|High Voltage Min (False)||1.8 V DC|
|Low Voltage Trigger Length Min||3 ms|
|High Voltage Trigger Length Min||3 ms|
|Digital Input Voltage Max||5.5 V DC|
|Digital Input Type||Switch (Active Low)|
|Number of Digital Inputs||6 (Shared)|
|Series Resistance||510 Ω|
|Digital Output Available Current||8.1 mA|
|Digital Output Voltage Min||0 V DC|
|Digital Output Voltage Max||3.3 V DC|
|PWM Frequency Max||50 kHz|
|PWM Resolution||0.8 %|
|Number of Digital Outputs||6 (Shared)|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||85 °C|
*Voltage measured with a 10-bit ADC, oversampled to 16-bits.
|Part. No. :||HUB0000|
|VINT Type :||HUB|