205000 Wireless VINT Hub

Wireless VINT Hub

VINT HUB versione WiFi, puo' essere connesso anche con cavo Ethernet. I dispositivi Phidgets connessi a questo HUB sono a disposizione della LAN
Categories
Prices are VAT included
€76.86 Price
€63.00 + VAT

Qty
 

Details

The Wireless VINT Hub is the easiest way to use Phidgets in locations far away from a computer. As long as there's a local WiFi signal and a nearby power outlet, this hub will make any attached Phidgets accessible to computers on the network without having to worry about using long cables. You can also wire it directly into your modem or network switch using an ethernet cable.

Six Versatile I/O Ports

With a Wireless VINT Hub, you can connect Phidgets and make them available on your local network. Each VINT port can perform one of four roles:

  • connect to a VINT Device
  • read a 0-5V Voltage or ratiometric sensor
  • act as a digital output
  • act as a digital input

Each port has a power and ground pin, so you can also use the ports to gain access to the USB voltage supply directly.

 

Plug in one of our many VINT-enabled Phidgets that perform a wide variety of functions. Control motors and LEDs, measure temperature or motion, or build a large scale system with many inputs and outputs.

Easy to Use

VINT Devices are 'plug and program': automatically discovered by the Phidget API with the same ease of programming you've come to expect from Phidgets. Each VINT device has a full API with functions and events to make programming a snap. See the API tab for more information.

Analog Sensor Compatible

Sometimes, you just need a few simple analog voltage sensors. Luckily, your collection of Phidget Analog Input sensors is not obsolete; each port on the Wireless VINT Hub can interface a 0-5V sensor. The VINT Port is backwards compatible with both ratiometric and non-ratiometric Phidget analog sensors.

Digital I/O Mode

In digital output mode, a VINT port can be used to drive LEDs, relays, digital circuits, and other simple electronics. Each port is PWM-enabled, allowing you to dim LEDs to a specific brightness.

Wire a switch or sensor contact directly into a VINT Port, and use the Digital Input mode to read the state of the switch.

If you need more than six inputs or outputs, you can expand by attaching a VINT I/O module. For example, there are VINT digital output modules with 16 outputs, allowing 96 digital outputs on a single hub!

Product Specifications

Board
Controlled By Local Network (Ethernet or Wi-Fi)
Number of VINT Ports 6
Electrical Properties
USB Voltage Min 4.5 V DC
USB Voltage Max 5.3 V DC
USB Speed High Speed
Current Consumption Min 32.5 mA
Available External Current 600 mA
Supply Voltage Min 8 V DC
Supply Voltage Max 30 V DC
Voltage Inputs
Number of Voltage Inputs 6 (Shared)
Voltage Input Resolution * 16 bit
Sensor Input Impedance 324 kΩ
Input Voltage Min (DC) 0 V DC
Input Voltage Max (DC) 5 V DC
Voltage Input Noise ** 1 mV DC
Sampling Interval Max 60 s/sample
Sampling Interval Min 1 ms/sample
Digital Inputs
Pull-up Resistance 124 kΩ
Low Voltage Max (True) 1 V DC
High Voltage Min (False) 1.8 V DC
Low Voltage Trigger Length Min 3 ms
High Voltage Trigger Length Min 3 ms
Digital Input Voltage Max 5.5 V DC
Digital Input Type Switch (Active Low)
Number of Digital Inputs 6 (Shared)
Digital Outputs
Series Resistance 510 Ω
Digital Output Available Current 8.1 mA
Digital Output Voltage Min 0 V DC
Digital Output Voltage Max 3.3 V DC
PWM Frequency Max 50 kHz
PWM Resolution 0.8 %
Number of Digital Outputs 6 (Shared)
Physical Properties
Operating Temperature Min -40 °C
Operating Temperature Max 85 °C

* - Voltage measured with a 10-bit ADC, oversampled to 16-bits.

** - Typical noise varies from 600uV to 10mV depending on selected data interval.

Specifications

Part. No. : HUB5000
VINT Type : HUB

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on Wireless VINT Hub

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. 1017 - PhidgetInterfaceKit 0/0/8

    191017 1017 - PhidgetInterfaceKit 0/0/8

    The PhidgetInterfaceKit 0/0/8 provides Small Signal Relays with 8 Relay Outputs, rated at 250VAC, or 2 Amps, for a maximum offalse
    Excl. Tax:
    €98.45
    Incl. Tax:
    €120.11
      Compare
  2. 3002 - Phidget Cable 60cm

    193002 3002 - Phidget Cable 60cm

    Cavo Phidgets per connettere il sistema VINT
    Excl. Tax:
    €3.10
    Incl. Tax:
    €3.78
      Compare
  3. 3004 - Phidget Cable 350cm

    193004 3004 - Phidget Cable 350cm

    Cavo Phidgets per connettere il sistema VINT
    Excl. Tax:
    €4.20
    Incl. Tax:
    €5.12
      Compare
  4. VINT Hub Phidget

    199000 VINT Hub Phidget

    The core of our product line, the USB VINT Hub has 6 VINT ports allowing for endless possibilities for USB sensing and control.
    Excl. Tax:
    €29.00
    Incl. Tax:
    €35.38
      Compare
  5. Isolated 12-bit Voltage Output Phidget

    199003 Isolated 12-bit Voltage Output Phidget

    Produce a voltage from -10 to +10 volts with this isolated voltage output module.
    Excl. Tax:
    €32.00
    Incl. Tax:
    €39.04
      Compare
  6. 4x Isolated Digital Input Phidget

    199009 4x Isolated Digital Input Phidget

    Add 4 isolated active-high digital inputs to your hub at the cost of only one VINT port.
    Excl. Tax:
    €22.00
    Incl. Tax:
    €26.84
      Compare
  7. 16x Isolated Digital Input Phidget

    199010 16x Isolated Digital Input Phidget

    Add 16 isolated active-high digital inputs to your hub at the cost of only one VINT port.
    Excl. Tax:
    €49.00
    Incl. Tax:
    €59.78
      Compare
  8. 2.5A Stepper Phidget

    199012 2.5A Stepper Phidget

    If you're looking for a compact solution for controlling a medium-sized stepper motor, the STC1001 is an affordable and convefalse
    Excl. Tax:
    €41.40
    Incl. Tax:
    €50.51
      Compare
  9. 3003 - Phidget Cable 10cm

    193003 3003 - Phidget Cable 10cm

    Cavo Phidgets per connettere il sistema VINT
    Excl. Tax:
    €2.10
    Incl. Tax:
    €2.56
      Compare
  10. CBL4104 - Phidget Cable 30cm

    204104 CBL4104 - Phidget Cable 30cm

    Cavo Phidgets per connettere il sistema VINT
    Excl. Tax:
    €2.30
    Incl. Tax:
    €2.81
      Compare
  11. CBL4105 - Phidget Cable 90cm

    204105 CBL4105 - Phidget Cable 90cm

    Cavo Phidgets per connettere il sistema VINT
    Excl. Tax:
    €2.60
    Incl. Tax:
    €3.17
      Compare
  12. CBL4106 - Phidget Cable 150cm

    204106 CBL4106 - Phidget Cable 150cm

    Cavo Phidgets per connettere il sistema VINT
    Excl. Tax:
    €3.20
    Incl. Tax:
    €3.90
      Compare
  13. 1126 - Differential Air Pressure Sensor ± 25kPa

    211126 1126 - Differential Air Pressure Sensor ± 25kPa

    Sensore di pressione differenziale, misura da –25kPa a +25 kPa. Compatibile con il sistema VINT
    Excl. Tax:
    €31.50
    Incl. Tax:
    €38.43
      Compare
  14. VINT Hub Phidget

    190001 VINT Hub Phidget

    The core of our product line, the USB VINT Hub has 6 VINT ports allowing for endless possibilities for USB sensing and control.
    Excl. Tax:
    €37.00
    Incl. Tax:
    €45.14
      Compare