Details
The SparkFun ESP32 Thing Plus DMX to LED Shield is the perfect way to send and receive DMX data. Whether it's coming in via the onboard XLR-3 jack or ArtNet, or outputting over the XLR-3 Jack/ArtNet, this shield has you covered! It's the perfect way to get started developing your own custom DMX fixtures, or even adding ArtNet capabilities to a current fixture. It also holds up to the DMX standard which requires electrical isolation between the controller and communication side to avoid ground loops.
The DMX to LED Shield can be powered either through the screw terminals or the USB connection from your microcontroller that's plugged into the shield. The screw terminal is a 2-pin 3.5 mm screw terminal capable of accepting 26-16 AWG wire with a strip length of ~5-6mm. Please note that you should always power the shield with 5V to provide proper power for RS485.
The outputs are broken out to poke home connectors ordered to match up with APA102 LED strips and LuMini devices. The DMX to LED shield is designed to work with the SparkFun Thing Plus - ESP32 WROOM or any board with a Feather footprint, so Feathers and Feather-Wings will fit it. Since many Feather boards are 3.3V logic, there is a logic level converter between the microcontroller and LED data pins to bring the poke home connectors up to 5V logic.
- Sizing (approx): 2.625 (L) x 2.7 (W) x 1.375 (H)
- 3 mounting holes for 4-40 screws
- Populated female headers for the ESP32 Thing Plus to interface to
- Screw terminal for 5VDC power input
- Compatible with 26-16 AWG wire
- 3-Pin XLR connections
- XLR-3 female connector
- XLR-3 male connector
- Poke-home connector allows for sturdy but temporary addressable LED connection without soldering
- Compatible with 24-18 AWG wire
- Optocouplers for power isolation
- Common Mode Rejection (CMR) at 1000V/ μs
- 5V DC-DC converter with isolation for ground loops
- Output: 5V at 200 mA
- Isolation voltage of 1 kVDC (1 min.)
- Isolation resistance of 1 GΩ
- 3.3 V to 5 V Logic converters between LED poke-home connectors and Feather headers
Specifications
Part. No. : | DEV-15110 |
Questions on SparkFun ESP32 Thing Plus DMX to LED Shield
No questions asked yet
Register or Login to ask a question.Related Products
-
808466 WT8266-S1 FCC/CE/RoHS/ Wi-Fi Module based on ESP8266
WT8266-S1 FCC/CE/RoHS/ Wi-Fi Module based on ESP8266 is a low consumption, high performance embedded Wi-Fi network control mofalse -
808476 Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! -
713711 SparkFun ESP8266 Thing - Dev Board
The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system false -
808585 Adafruit Feather HUZZAH with ESP8266 WiFi
This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB anfalse -
713794 SparkFun Blynk Board - ESP8266
The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system false -
713990 SparkFun nRF52832 Breakout
It’s half microcontroller, with a list of features including 32 configurable I/O pins, SPI, I2C, UART, PWM, ADC’s, 512kB flasfalse -
808888 ESP-WROOM-32 Wi-Fi and Bluetooth radio
SMD module which you can integrate to your own PCB design. Espressif has took care for all certifications and regulations so false -
808889 ESP32-CoreBoard ESP32 WiFi/BLE development board
ESP32-CoreBoard is easy to prototype development board for the new ESP32 SoC from Espressif, it has dual header pins with 0.1false -
808962 ESP32 Breakout Kit
This is the breakout kit specially made for ESP32, it contains a breakout board and some pin headers. -
714155 SparkFun ESP32 Thing Power Control Shield
The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system false -
809014 ESP32-EVB DEVELOPMENT BOARD WITH WIFI BLE ETHERNET
This is the ultimate IoT board with wired 100Mb Ethernet Interface, Bluetooth LE, WiFi, Remote control IR, and CAN connectivity. -
809015 ESP32-GATEWAY DEVELOPMENT BOARD WITH WIFI BLE ETHERNET
This is the ultimate IoT board with wired 100Mb Ethernet Interface, Bluetooth LE, and WiFi. -
809249 ESP32-LyraT - SPEECH RECOGNITION DEVELOPMENT BOARD
Scheda per Riconoscimento Vocale sviluppata da Espressif. Include un modulo ESP32-WROOM32 -
809280 ESP32-PRO - ESP32 board with 32Mbit SPI Flash 32Mbit PSRAM
Scheda basata sul chip ESP32 con un microcontrollore PIC32MX270F256DT, una potente soluzione IOT con la proverbiale affidabilfalse -
510053 ESP-EYE EMBEDDED CAMERA WITH AI
Scheda che combina un modulo WiFi ESP32 e un modulo ESP-WHO per il Riconoscimento Faccial, implementa tecnologia AI -
809499 USB-RS485B - Low cost DMX512 Transmitter
Interfaccia USB to RS485 funzionante a qualsiasi baud rate fino a 250k baud. Fino a 128 dispositivi sul bus. Puo' essere usatfalse