Details
RF Explorer is a handheld digital spectrum analyzer, a very affordable tool for work in all ISM popular frequency bands. It is based on a highly integrated frequency synthesizer which offers high performance, compact size, low consumption and low cost.
It has been designed to be used equally well outdoor and indoor, and can be connected to a PC for extra functionality using standard mini-USB 2.0 connector.
This model comes with a nice Nagoya NA-773 wideband telescopic antenna.
Feature
- Pocket size and light weight
- Solid aluminum metal case
- Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes
- Lifetime free firmware upgrades available, open to community requested features
- High capacity Lipo for 16hs+ of continuous run, rechargeable by USB
- Windows PC client Open Source
- Can be extended with internal Expansion Modules for additional band and functionality
- Wide band coverage to all popular sub-1Ghz ISM bands, including 315MHz, 433MHz, 868MHzand 915MHz, also including UHF TV, 70cm and 33cm HAM radio, GSM, etc. Any frequency from 240MHzto 960MHzis covered.
Important: Note this unit does not include RF Generator functionality, only Spectrum Analyzer functionality is available
Specification
- Frequency band: 240 - 960 MHz
- Frequency span: 112KHz - 100MHz
- Graphics LCD 128x64 pixels, great visibility outdoors
- PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits
- Backlight for great indoor visibility
- Standard SMA 50 ohms connector, wideband Nagoya NA-773 telescopic antenna included
- Amplitude resolution: 0.5dBm
- Dynamic range: -115dBm to 0dBm
- Absolute Max input power: +5dBm
- Average noise level (typical): -110dBm
- Frequency stability and accuracy (typical): +-10ppm
- Amplitude stability and accuracy (typical): +-3dBm
- Frequency resolution: 1Khz
- Resolution bandwidth (RBW): automatic 2.6Khz to 600Khz
- Weight: 185g
- Size: 113x70x25 mm
Warning: RF Explorer is a very sensitive device, take care of if it by reading this document: http://www.rf-explorer.com/care
For more information, please visit here.
Specifications
Part. No. : | 109990010 |
Questions on RF Explorer WSUB1G - Digital Spectrum Analyzer
No questions asked yet
Register or Login to ask a question.Related Products
-
115024 RF Explorer 2.4G - Digital Spectrum Analyzer
RF Explorer is a handheld digital spectrum analyzer, aimed to provide a very affordable tool for work in all ISM popular freqfalse -
115055 RF Explorer 3G Combo - Digital Spectrum analyzer
RF Explorer is a handheld digital spectrum analyzer, a very affordable tool for work in all popular frequency bands. -
115056 RFEM2.4G module
RFEM2.4G is an Expansion Module for RF Explorer. It can be plugged in your RF Explorer unit to extend the coverage to 2.4Ghz false -
115057 RFEM WSUB3G Module
RFEMWSUB3G is an Expansion Module for RF Explorer. It can be plugged in your RF Explorer unit to extend the coverage to 15-27false -
115078 RF Power Limiter
The RF Explorer Power Limiter is a custom device designed from scratch to be the perfect protection against strong RF fields. -
808117 RF Explorer Protection Boot (Yellow)
The RF Explorer protection boot is a custom designed, high quality flexible silicone rubber shield to save your device from sfalse -
808118 RF Explorer Protection Boot (Blue)
The RF Explorer protection boot is a custom designed, high quality flexible silicone rubber shield to save your device from sfalse -
808119 6GHz 2W SMA Attenuator - 10dB
SMA attenuators are used to reduce the input power, and therefore enable RF Explorer to measure stronger signals. It is also false -
808120 6GHz 2W SMA Attenuator - 30dB
SMA attenuators are used to reduce the input power, and therefore enable RF Explorer to measure stronger signals. It is also false -
808121 RF Explorer Signal Generator (RFE6GEN)
The RF Explorer Signal Generator (RFEGen) is a powerful, wideband fully programmable RF signal generator. It is the perfect cfalse -
808309 RF Explorer Protection Boot (Red)
The RF Explorer protection boot is a custom designed, high quality flexible silicone rubber shield to save your device from sfalse -
808360 Nagoya NA-773 antenna
The Nagoya NA-773 antenna is a 50 ohm, SMA male connector telescopic antenna designed for handheld devices operating in 144MHfalse -
808362 RF Explorer LCD screen
This LCD is a screen replacement for RF Explorer, the same custom designed COG LCD model included in all RF Explorer handheldfalse -
808470 RF Explorer Protection Boot (Black)
The RF Explorer protection boot is a custom designed, high quality flexible silicone rubber shield to save your device from sfalse -
808901 RF Explorer H-Loop Near Field Antenna (RFEAN25)
The low-loss design exhibits at least 10dB more sensitivity in the range 20-6000MHz than other H-loop options in the market, false -
808902 RF Explorer Near Field Antenna Kit
The three magnetic H-Loop antennas are very sensitive, compact and easy to use antennas for all sort of radiation sources. -
809062 SMA Push-ON Male/Female adapter
The RF Explorer SMA Push-ON Male/Female adapter is great for repetitive connections to the SMA port. -
809063 RF Explorer 3G+ IoT for Raspberry Pi
RF Explorer 3G+ IoT modules are ready to use, advanced Spectrum Analyzer devices you can configure and control any way you wafalse -
809064 RF Explorer 3G+ IoT Shield for Arduino
RF Explorer 3G+ IoT modules are ready to use, advanced Spectrum Analyzer devices you can configure and control any way you wafalse -
809153 RF Explorer WSUB1G+
RF Explorer WSUB1G+ is a powerful, high performance digital spectrum analyzer covering the 1GHz frequency range starting at 50KHz. -
809227 RF Explorer Upconverter
RF Explorer Upconverter is a high performance RF frequency mixer to enable input frequency ranges from 100KHz to 250MHz in RFfalse