Details
The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer.
This new revision uses SMD headers for the RFID module, and has a solder jumper which allows you to disable or enable the buzzer.
Note: This product does not come with the RFID reader. Check below for compatible readers.
Dimensions: 1.4x1.2x0.57"
Documents:
Sparkfun code : SEN09963
Related Products
-
316004 MOD-RFID125 USB RFID READER FOR 125 KHZ TAGS
USB RFID READER FOR 125 KHZ TAGS WITH EMULATION OF KEYBOARD AND RS232 -
316005 MOD-RFID125-BOX USB RFID READER FOR 125 KHZ TAGS
USB RFID READER FOR 125 KHZ TAGS WITH EMULATION OF KEYBOARD AND RS232 -
711828 RFID Reader ID-20LA (125 kHz)
This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup isfalse -
711827 RFID Reader ID-12LA (125 kHz)
This is the ID-12LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup isfalse -
711862 RFID Reader ID-3LA (125 kHz)
This is the ID-3LA, a very simple to use RFID reader module from ID Innovations. The only holdups are the 2mm pin spacing andfalse -
713198 SparkFun RFID Starter Kit
This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off thefalse -
714066 SparkFun Simultaneous RFID Reader - M6E Nano
Lettore/Scrittore di TAG RFID basato sul reader M6E Nano, utilizzabile come Shield Arduino