Sabertooth 2X5 is the motor driver of choice for small differential-drive robots. It is ideal for smaller robots- up to 3lbs in combat or 25 lbs for general purpose use. It is also a great choice in any application where you need to control two brushed motors.
Out of the box, the Sabertooth can supply two DC brushed motors with up to 5A each continuously. Peak currents of 10A are achievable for short periods. Because Sabertooth 2x5 incorporates soft current limiting and thermal protection, you need not worry about killing the driver with accidental stalls or by hooking up too big a motor.
Sabertooth allows you to control two motors with: analog voltage, radio control, serial and packetized serial. You can build many different robots of increasing complexity for years to come with a Sabertooth. Sabertooth has independent and speed+direction operating modes, making it the ideal driver for differential drive (tank style) robots and more.
The operating mode is set with the onboard DIP switches so there are no jumpers to lose or complicated programming sequences. Sabertooth features screw terminal connectors - making it possible for you to build a robot without having to solder.
Sabertooth is the first synchronous regenerative motor driver in its class. The regenerative topology means that your batteries get recharged whenever you command your robot to slow down or reverse. Sabertooth also allows you to make very fast stops and reverses - giving your robot a quick and nimble edge. In certain operating modes Sabertooth can process up to 3000 speed commands per second.
Sabertooth has a built in 5V BEC that can provide power to a microcontroller or R/C receiver. It also features a lithium cutoff mode allowing Sabertooth to operate safely with lithium ion and lithium polymer battery packs - the highest energy density batteries available.
Sabertooth's transistors are switched at ultrasonic speeds (32kHz) for silent operation.
|Input Votage||6 ... 18V|
5A continuous, 10A peak
|Protection||Thermal - Overcurrent|
|Input Modes||Analog, R/C, simplified serial, packetized serial|
|Features|| Synchronous regenerative drive
Ultra-sonic switching frequency
Thermal and overcurrent protection
Lithium protection mode
|Dimensions||45 x 40 x 13mm|
|Applications||Ant/Beetleweight combat robots
Differential drive robots up to 25lb
Radio controlled tanks, cars and boats
Easy speed/direction control for pumps, conveyors, automation and any application that uses one or two brushed DC motor
Example Projects and Utilities :
Questions on Sabertooth 2X5 Motor Controller 2X5A
No questions asked yetRegister or Login to ask a question.
330019 Sabertooth 2X12 Motor Controller 2X12AThe Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market.Excl. Tax:€62.30Incl. Tax:€76.01
330020 Sabertooth dual 2x25A V2 motor driverThe Sabertooth 2X25 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable falseExcl. Tax:€101.80Incl. Tax:€124.20
330026 Sabertooth dual 32A motor driverSabertooth 2x32 is a dual channel motor driver capable of supplying 32 amps to two motors, with peak currents up to 64 amps pfalseExcl. Tax:€101.80Incl. Tax:€124.20
343149 3149 - Jrk G2 24v21 USB Motor Controller with FeedbackThe Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuratifalseExcl. Tax:€142.00Incl. Tax:€173.24
343148 3148 - Jrk G2 18v27 USB Motor Controller with FeedbackThe Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuratifalseExcl. Tax:€155.00Incl. Tax:€189.10
343147 3147 - Jrk G2 24v13 USB Motor Controller with FeedbackThe Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuratifalseExcl. Tax:€110.00Incl. Tax:€134.20