Details
This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino’s built-in SD library. It supports SD, SDHC and Micro SD cards. It will only occupy the SPI port of your Arduino. Comparing to previous versions, it combines the standart SD slot and the Micro SD slot into a standard one, the included adaptor enables using of Micro SD cards . You can stack on other shields that work with the unused pins. Additionally, the preformed I2C and UART port facilitates your connection with Grove modules.
Features
- Stand SD card、SDHC card and TF card compatible
- UART Grove & I2C connection compatible
- Fully supported SD Library
- Minimal number of SPI port
- Truly stackable
Specification
Item |
Min |
Typical |
Max |
Unit |
Voltage |
3.5 |
5.0 |
5.5 |
V |
Current |
0.159 |
100 |
200 |
mA |
Supported Card Type |
SD card(<=16G); Micro SD card(<=2G); SDHC card(<=16G) |
/ |
||
Dimension |
68.7x53.5x19.00 |
mm |
||
Net Weight |
14.8 |
g |
Documents
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials.
Specifications
Part. No. : | SLD01095P |
Interface : | SPI |
Shield Type : | Utility |
Related Products
-
500143 Arduino UNO R3 con microcontrollore ATmega328
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 insteadfalse