Details
Seeeduino Lotus Cortex-M0+ is an ATMEGA SAM D21 Microcontroller development board. The Atmel® | SMART™ SAM D21 is a series of low-power microcontrollers using the 32-bit ARM® Cortex®-M0+ processor with 256KB Flash and 32KB of SRAM. you can consider the Seeeduino Lotus Cortex-M0+ as a combination of Seeeduino and Base Shield.
Seeeduino Lotus Cortex-M0+ has 14 digital input/outputs (10 of which support PWM) and 6 analog input/outputs, 3 Serial Communication Interface, a micro USB connector, a JST2.0 Li-Po connector, an ICSP header, 12 Grove connectors, a reset button.
Seeeduino Lotus Cortex-M0+ is an upgraded version of Seeeduino Lotus V1.1, it replaces a more powerful chip, optimizes the circuit layout, and the power supply is more stable. Because this chip supports direct USB level output, there is no need to use a serial port to USB chip, like CP2102N. Therefore, one more hardware serial port is available to the user.
Features
-
- Compatible with Arduino UNO
- ARM® Cortex®-M0+ 32bit 48MHz microcontroller(SAMD21)
- 12 on-board Grove connectors
- 14 Digital I/O Pins (10 PWM outputs)
- 6 Analog Inputs
- Support Power Path Management
- Support micro-usb or Li-Po battery powered
- 2A maximum charging current
- Suitable for low power design
Attention
All the I/O pins are 3.3V, please do not input more than 3.3V, otherwise the CPU may be damaged.
Specifications
Part. No. : | 102010228 |
Interface : | n/a |
Voltage : | 5 |
Shield Type : | Sensors |
Related Products
-
808462 Grove - Mega Shield v1.2
Grove - Mega Shield is a extension board for Arduino Mega and Google ADK. We have standardized all the connectors into 4 pinsfalse -
809226 Seeeduino Lotus V1.1 - ATMega328 Board with Grove Interface
It turns out Seeeduino Lotus V1.0 is very welcome because it combines the advantages of Seeeduino board and base shield and afalse -
121303 DFRduino M0 Mainboard (Arduino Compatible)
Scheda Arduino Compatibile basata su ARM Cortex-M0 a 32 bit, 5V -
121307 WiDo - An Arduino Compatible IoT (internet of thing) Board
Scheda Arduino Compatibile basata su ATmega32U4, include modulo WiFi WG1300, un nodo IoT economico e potente