Sensors/Infrared

Side-looking Infrared Emitters and IR Detectors. These simple devices operate at 940nm and work well for generic IR systems including remote contro...

  Miniaturized receiver for IR control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter....

Features: Dimensions: 32 x 24 x 27H mmVoltage: 5-12VDCOutput: 3,3V TTLDetection Distance: 3-7mt (approx, adjustable)Delay Time: 5-200s (adjustable)...

  This small digital distance sensor detects objects between 2 and 10 cm (0.8" and 4") away. With its quick response time, small size, and low curr...

This is a simple to use PIR motion sensor with Grove compatible interface. Simply connect it to Stem shield and program it, when anyone moves in it...

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR...

Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contrib...

The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Recei...

This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and ...

The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the o...

Datasheet PDF (230K)

The GP2Y0A51SK0F is the shortest-range Sharp analog distance sensor we carry, featuring a detection range of 0.8″ to 6″ (2 cm to 15 cm). The short...

The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects.  The sensor works by det...

The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum d...

This is a mini passive infrared sensor that it can sense movement of people, animals, or other objects. It features high sensitivity and instant re...

This is a Grove interface compatible Magnetic switch module. It is based on encapsulated dry reed switch CT10. CT10 is single-pole, single throw (S...

This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC It measures the cap...

This SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be used to determine ho...

The GP2Y0A41SK0F Sharp analog distance sensor features a detection range of 1.5″ to 12″ (4 cm to 30 cm). The shorter range gives you higher resolu...

The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distanc...

The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. The detection r...

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after...

The reflectivity of infrared light varies with the color and distance of the reflecting surface. According to this principle, Grove - Infra...

PIR（Passive Infrared Detection）are used to detect motion of human movement. This version has a large lens which can support long range and wide an...