438450 MB8450 - Car Detection Sensor

MB8450 - Car Detection Sensor

The MB8450 Car Detection Sensor is a high performance, low-cost USB ultrasonic proximity sensor designed to detect the side of a vehicle that drives up alongside the.sensor.
Prices are VAT included
€128.10 Price
€105.00 + VAT

Qty
 

Details

The MB8450 Car Detection Sensor is a high performance, low-cost USB ultrasonic proximity sensor designed to detect the side of a vehicle that drives up alongside the.sensor. The MB8450 Car Detection Sensor features a simultaneous multi-sensor design which allows the sensor to operate even in the presence of other ultrasonic sensors. The sensors utilize a USB Micro‑B connector for simple interfacing. Users can integrate many sensors into one system with little to no effect from the sensor-to-sensor interference which can occur with other ultrasonic sensor solutions.

Sensor Line Specifications

 
  • USB interface
  • ~4 second target acquire time*
  • ~5 second target release time*
  • Multi-sensor operation
  • ~250mS between range readings
  • Maximum range of 500 cm (196 inches)
  • Preset proximity detection zone of 150cm
  • Vehicle detection sensor
  • 42kHz Ultrasonic sensor measures distance to objects
  • RoHS compliant
  • Virtually no sensor dead zone, objects closer than 50 cm typically range as 50 cm
  • Small, light weight module
  • Designed for easy integration into your project or product

Easy to Use Ultrasonic Sensors

The MB8450 Car Detection Sensor is a low‑cost vehicle detection sensor that uses ultrasonic technology for non-contact sensing. The MB8450 is designed to be an easy to use sensor for applications where vehicle detection is desired. This sensor is great for applications such as vehicle kiosks, ATMs, and bank drive thru's.

The MB8450 Car Detection Sensor provides a component module solution that offers an easy to use interface, calibrated beam patterns, stable range and proximity information, and a host of other features detailed in the product datasheets.

The Interface

The MB8450 Car Detection Sensor interface was designed to be easy and intuitive to use. The interface is an easy to use Micro-B USB connection, the same connection used on many smartphones.

The Controlled Beam Shape

The MB8450 Car Detection Sensor offers a controlled beam that is designed to reject small objects (clutter) outside of the central beam area without detecting frivolous or unwanted targets.

The Calibration

Each MB8450 Car Detection Sensor is tested for proper operation at our facility and comes with a factory calibrated beam pattern to ensure consistent operation of the sensor even from part‑to‑part.

The MB8450 Car Detection Sensor automatically calibrates to its environment after power up, before taking the first reading. Because this power up calibration only occurs on power up, it is recommended that users power off and then on the sensor when temperature or humidity conditions change.

 

More infos

Specifications

Part. No. : MB8450
Interfaces : Pulse Width
Max Range : 500
Resolution : cm
Use : Outdoor

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on MB8450 - Car Detection Sensor

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.