714074 SparkFun 20x4 SerLCD - Black on RGB 3.3V

SparkFun 20x4 SerLCD - Black on RGB 3.3V

Display seriale basato su chip AVR, e' una soluzione semplice ed economica per aggiungere un Display RGB 20x4 a qualsiasi progetto. Interfacciabile con: I2C, SPI, UART
Categories
Prices are VAT included
€33.67 Price
€27.60 + VAT

Qty
 

Details

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We’ve seriously overhauled the PCB design on the back of the screen by including an ATMega328P that handles all of the screen control, meaning a backpack is no longer needed! This display can now accept three different types of commands: serial, I2C, and SPI. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.

The on-board ATMega328P AVR microcontroller utilizes 11.0592 MHz crystal for greater communication accuracy with adjustable baud rates of 1200 through 1000000 but is default set at 9600. The firmware for this SerLCD is fully opensource and allows for any customizations you may need.

Note: Since the SerLCD is a 3.3V device, please make sure you convert to 3.3V logic depending on your chosen microcontroller or single board computer. Otherwise, you may risk damaging your board.

GET STARTED WITH THE SPARKFUN SERLCD GUIDE

  • 20x4, Black on RGB Display
  • The AVR ATMega328p (with Arduino-compatible bootloader) is populated on the back of each LCD screen and handles all of the LCD control
  • Three communication options: Serial, I2C and SPI
  • Adjustable I2C address controlled via software special commands (0x72 default)
  • Emergency reset to factory settings (Jumper RX to GND on bootup)
  • Operational backspace character
  • Incoming buffer stores up to 80 characters
  • Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
  • Pulse width modulation of contrast allows for software defined contrast amount.
  • User definable splash screen
  • Open-sourced firmware and Arduino-compatible bootloader enables updates via the Arduino IDE

Specifications

Part. No. : LCD-14074

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on SparkFun 20x4 SerLCD - Black on RGB 3.3V

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Serial Graphic LCD 160x128

    708884 Serial Graphic LCD 160x128

    This is a very large serial graphic LCD. The Serial Graphic LCD backpack is soldered to the 160x128 pixel “Huge” Graphic LCD false
    Excl. Tax:
    €61.66
    Incl. Tax:
    €75.23
      Compare
  2. LCD05-16x2-Green -  Serial/I2C Display 16x2 - Green Background

    785002 LCD05-16x2-Green - Serial/I2C Display 16x2 - Green Background

    Serial / I2C Character LCD Display. Control mode can be selected using a jumper. This module can read a 3x4 matrix keypad (nofalse
    Excl. Tax:
    €17.74
    Incl. Tax:
    €21.64
      Compare
  3. LCD05-16x2-B Serial/I2C Display 16x2 - Blue Background

    785003 LCD05-16x2-B Serial/I2C Display 16x2 - Blue Background

    Serial / I2C Character LCD Display. Control mode can be selected using a jumper. This module can read a 3x4 matrix keypad (nofalse
    Excl. Tax:
    €17.74
    Incl. Tax:
    €21.64
      Compare
  4. LCD05-20x4-Green Serial/I2C Display 20x4 - Green Background

    785004 LCD05-20x4-Green Serial/I2C Display 20x4 - Green Background

    Serial / I2C Character LCD Display. Control mode can be selected using a jumper. This module can read a 3x4 matrix keypad (nofalse
    Excl. Tax:
    €25.35
    Incl. Tax:
    €30.93
      Compare
  5. LCD05-20x4-Blue - Serial/I2C Display 20x4 - Blue Background

    785005 LCD05-20x4-Blue - Serial/I2C Display 20x4 - Blue Background

    Serial / I2C Character LCD Display. Control mode can be selected using a jumper. This module can read a 3x4 matrix keypad (nofalse
    Excl. Tax:
    €25.35
    Incl. Tax:
    €30.93
      Compare
  6. SparkFun 16x2 SerLCD - Black on RGB 3.3V

    714072 SparkFun 16x2 SerLCD - Black on RGB 3.3V

    Display seriale basato su chip AVR, e' una soluzione semplice ed economica per aggiungere un Display RGB 16x2 a qualsiasi profalse
    Excl. Tax:
    €22.10
    Incl. Tax:
    €26.96
      Compare

Price Match



* Required Fields