Details
If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1011 SparkFun Capacitive Touch Breakout offers a single, momentary capacitive touch button with easy-to-use digital I/O pins.
The AT42QT1011 is a dedicated, single-button capacitive sense chip. The chip handles monitoring a conductive area for touch. As long as a touch (e.g., from a finger) is detected, the AT42QT1011 keeps the output line high. Otherwise, the line is kept low. You just need to provide a power source (1.8V–5V) and ground for the AT42QT1011 to work. Additionally, a PAD pin is available if you would like to create your own external electrode.
Unlike its sibling, the AT42QT1011 does not have an internal time-out, meaning that if you hold your finger to the breakout’s pad for any length of time, it will stay on. The difference between the AT42QT1010 and the AT42QT1011 is small but may be a game changer depending on your project’s uses.
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (AT42QT1011)
- GitHub
Specifications
| Part. No. : | SEN-14520 |
Questions on SparkFun Capacitive Touch Breakout - AT42QT1011
No questions asked yet
Register or Login to ask a question.Related Products
-
115107 Grove - I2C Touch Sensor
The I2C Touch Sensor is based on FreeScale MPR121, to feel the touch or proximity of human being fingers. This sensor includefalse -
511362 Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070 -
This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is requfalse -
511374 Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010
This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No mfalse -
115227 Grove - Touch Sensor
This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector false -
712013 SparkFun Touch Shield
The MPR121QR2 IC is a great way to build simple capacitive touch interfaces, and now it’s even easier to incorporate into youfalse -
808302 Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121
This touch-able add on shield for Arduinos will inspire your next interactive project with 12 capacitive touch sensors. Capacfalse
|
SparkFun Humidity and Temperature Sensor Breakout - SHT15 
Excl. Tax:
€32.18
Incl. Tax:
€39.26
|
|
ESP32-PRO - ESP32 board with 32Mbit SPI Flash 32Mbit PSRAM 
Excl. Tax:
€18.00
Incl. Tax:
€21.96
|
-
809290 Teensy 3.6 with Header Pins
Excl. Tax:€31.00Incl. Tax:€37.82 -
809289 A20-SOM204 - A20 DUAL CORE CORTE...
Excl. Tax:€57.00Incl. Tax:€69.54 -
809288 Speaker - 40mm Diameter - 4 Ohm ...
Excl. Tax:€5.70Incl. Tax:€6.95 -
809287 Adafruit BMP388 - Precision Baro...
Excl. Tax:€11.00Incl. Tax:€13.42 -
809286 Adafruit MPRLS Ported Pressure S...
Excl. Tax:€16.50Incl. Tax:€20.13
You have no items to compare.
-
Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010
Excl. Tax:€6.53Incl. Tax:€7.97Out of stock
-
-
-
