Details
The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. While some temperature sensors use an analog voltage to represent the temperature, the TMP102 uses the I2C bus of the Arduino to communicate the temperature. Needless to say, this is a very handy sensor that doesn’t require much setup.
The TMP102 is capable of reading temperatures to a resolution of 0.0625°C, and is accurate up to 0.5°C. The breakout has built-in 4.7kΩ pull-up resistors for I2C communications and runs from 1.4V to 3.6V. I2C communication uses an open drain signaling, so there is no need to use level shifting.
GET STARTED WITH THE TMP102 BREAKOUT GUIDE
Features:
- Uses the I2C interface
- 12-bit, 0.0625°C resolution
- Typical temperature accuracy of ±0.5°C
- 3.3V sensor
- Supports up to four TMP102 sensors on the I2C bus at a time
Documents:
Specifications
Part. No. : | SEN-13314 |
Questions on SparkFun Digital Temperature Sensor Breakout - TMP102
No questions asked yet
Register or Login to ask a question.Related Products
-
710167 Humidity and Temperature Sensor - RHT03
The RHT03 (also known by DHT-22) is a low cost humidity and temperature sensor with a single wire digital interface. -
711050 DS18B20 - Waterproof Digital Temperature sensor
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. -
710988 TMP36 - Analog temperature sensor
The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportionfalse -
709570 Infrared Thermometer - MLX90614
Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and false