Details
The SparkFun Mini Inventor’s Kit (SMIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. This mini SIK includes everything you need to complete 8 circuits that will teach you how to blink an LED, read sensors, drive servos, and more. You don’t need any previous programming or electronics experience to use this kit.
The on-line SIK Digital Guide (in the Documents section below) contains step by step instructions of how to connect each circuit with the included parts. Full example code is provided and explained and even includes troubleshooting tips if something goes wrong.
The kit does not require any soldering and is recommended for beginners ages 10 and up. This miniature version of the SIK includes the first 8 experiments of our full sized SIK to make it cheaper and more practical for beginning and interested users.
Circuit Examples:
- Circuit 1: Blinking an LED
- Circuit 2: Reading a Potentiometer
- Circuit 3: Driving and RGB LED
- Circuit 4: Driving Multiple LEDs
- Circuit 5: Push Buttons
- Circuit 6: Reading a Photo Resistor
- Circuit 7: Reading a Temperature Sensor
- Circuit 8: Driving a Servo Motor
Kit includes:
- SparkFun RedBoard
- White Solderless Breadboard
- Small Servo
- TMP36 Temp Sensor
- 6' SparkFun USB Cable
- Jumper Wires
- Photocell
- Tri-color LED
- Red, Blue, Yellow, and Green LEDs
- 10K Trimpot
- Momentary Pushbutton Switch - 12mm
- 330 and 10K Resistors
Documents:
- SIK Digital Guide (Only First 8 Experiments Used)
- SIK Code Library (Only First 8 Experiments Used)
- Mini SIK V3.2 Wish List
Specifications
Part. No. : | KIT-13160 |
Questions on SparkFun Inventor's Kit - V3.1
No questions asked yet
Register or Login to ask a question.Related Products
-
500143 Arduino UNO R3 con microcontrollore ATmega328
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 insteadfalse -
802431 Power Supply 3-12V 600mA
Power-saving stabilized power supply. Selectable output: 3-12V. 600mA -
802434 Switching power supply 9V 600mA
Stabilized switching power supply. Single output voltage: 9V 600mA -
802463 Arduino Starter kit - English
The most common and useful electronic components with a selection of 15 projects that start from a low complexity, in order tfalse -
711783 SparkFun Inventor's Kit - Carrying Case
The underside of the box has a translucent snap-in latch lid as well, with an additional three compartments, where you can pufalse -
809447 Alimentatore AC/DC 12V 1000mA Plug 5.5 x 2.1mm
Alimentatore stabilizzato 12V - 1000mA - 100/240VAC