Details
The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next Arduino project, displaying diagnostic information without resorting to serial output, and teaching a little game theory while creating a fun, Arduino-based video game. Most important of all, though, is the Micro OLED is easy to control over either an SPI or I2C interface.
You may be asking yourself, “Why does this board look so familiar?” Yes, this is essentially a MicroView without the Arduino portion. We understand that sometimes you just need a breakout, an open door for you to explore the possibilities of a super small OLED screen. Speaking of, the screen on this breakout is only 64 pixels wide and 48 pixels tall, measuring 0.66" across.
In total, the Micro OLED Breakout provides access to 16 of the OLED’s pins. Fortunately, though, you’ll only need about half of them to make the display work. The top row of pins (GND-CS) breaks out everything you’d need to interface with the OLED over an SPI or I2C interface. The pins on the bottom (D7-vB) are mostly only used if you need to control the display over a parallel interface. This board operates at 3.3V with a current of 10mA (20mA max).
Features:
- Operating Voltage: 3.3V
- Screen Size: 64x48 pixels (0.66" Across)
- Monochrome Blue-on-Black
- SPI or I2C Interface
Documents:
- Schematic
- Eagle Files
- Hookup Guide
- GitHub (Example Code & Design Files)
Specifications
Part. No. : | LCD-13003 |
Questions on SparkFun Micro OLED Breakout
No questions asked yet
Register or Login to ask a question.Related Products
-
502065 AXE132 - Serial OLED / LCD Driver Board
Once you have seen an OLED display in use you will never want to use an LCD again! Much brighter display, much better viewingfalse -
115045 Grove - OLED Display 128*64
LED 128×64 Display module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface. -
712923 MicroView - OLED Arduino Module
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a builtfalse -
808141 SHARP Memory Display Breakout - 1.3" 96x96 Silver Monochrome
The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usfalse -
808142 5mm Chromed Metal Wide Concave Bevel LED Holder - Pack of 5
Keep your 5mm LEDs in place with these chromed metal LED holders. These are handy for projects using individual LEDs as they false -
808530 Monochrome 2.42" 128x64 OLED Graphic Display Module Kit
These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display.The driver chip, SSD130false -
809016 MOD-OLED-128x64 OLED DISPLAY MODULE 27X11MM SIZE AND I2C CONTROL
Low cost, low power, high contrast LCD display with UEXT connector. You can control it via I2C. -
714532 SparkFun Micro OLED Breakout (Qwiic)
The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions, that hasfalse -
714059 SmartiPi Touch
The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into false -
714074 SparkFun 20x4 SerLCD - Black on RGB 3.3V
Display seriale basato su chip AVR, e' una soluzione semplice ed economica per aggiungere un Display RGB 20x4 a qualsiasi profalse -
809312 Grove - Triple Color E-Ink Display 2.13''
Grove - OLED 1.12" is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristifalse -
809310 Grove - Triple Color E-Ink Display 1.54''
Grove - OLED 1.12" is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristifalse