714352 SparkFun Qwiic Shield for Arduino

SparkFun Qwiic Shield for Arduino

The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device.
Prices are VAT included
€6.10 Price
€5.00 + VAT

Qty
 

Details

The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield connects the I2C bus on your Arduino to a series of SparkFun Qwiic connectors and provides the circuitry to convert the 5V given to the 3.3V required by I2C boards in our Qwiic system. As long as your devices are on different addresses, the Qwiic system allows for daisy chaining, meaning you can stack as many sensors as you’d like to create a tower of sensing power!

The Qwiic Shield has four Qwiic connection ports, all on the same I2C bus, as well as a large prototyping area to design and make your own unique circuits. The shield also has a few 3-by-1 rails to help with prototyping, as well as buses for ground, 5V and even 3.3V. We have included four mounting ports in the same design as our Qwiic sensors, allowing you to affix your small board to the top of the shield.


The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.


Note: This includes R3 Arduino headers, but they are not pre-soldered onto the board, so some assembly will be required when putting the shield together.

GET STARTED WITH THE SPARKFUN QWIIC SHIELD FOR ARDUINO GUIDE

Specifications

Part. No. : DEV-14352
Interface : I/O, I2C
Voltage : 5
Shield Type : Utility

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on SparkFun Qwiic Shield for Arduino

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. SparkFun GPS Breakout - XA1110 (Qwiic)

    714414 SparkFun GPS Breakout - XA1110 (Qwiic)

    Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chipset, loaded with specialized Sparkfalse
    Excl. Tax:
    €39.20
    Incl. Tax:
    €47.82
      Compare
  2. SparkFun Spectral Sensor Breakout - AS7263 NIR (Qwiic)

    714351 SparkFun Spectral Sensor Breakout - AS7263 NIR (Qwiic)

    The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it eafalse
    Excl. Tax:
    €21.00
    Incl. Tax:
    €25.62
      Compare
  3. SparkFun Spectral Sensor Breakout - AS7262 Visible (Qwiic)

    714347 SparkFun Spectral Sensor Breakout - AS7262 Visible (Qwiic)

    The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easifalse
    Excl. Tax:
    €21.00
    Incl. Tax:
    €25.62
      Compare
  4. Qwiic Cable - Breadboard Jumper (4-pin)

    714425 Qwiic Cable - Breadboard Jumper (4-pin)

    This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookupfalse
    Excl. Tax:
    €1.70
    Incl. Tax:
    €2.07
      Compare
  5. Qwiic Cable - 500mm

    714429 Qwiic Cable - 500mm

    This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bufalse
    Excl. Tax:
    €2.20
    Incl. Tax:
    €2.68
      Compare
  6. Qwiic Cable - 100mm

    714427 Qwiic Cable - 100mm

    This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bfalse
    Excl. Tax:
    €2.00
    Incl. Tax:
    €2.44
      Compare
  7. Qwiic Cable - 200mm

    714428 Qwiic Cable - 200mm

    This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bfalse
    Excl. Tax:
    €2.00
    Incl. Tax:
    €2.44
      Compare
  8. Qwiic Cable - 50mm

    714426 Qwiic Cable - 50mm

    This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bufalse
    Excl. Tax:
    €1.20
    Incl. Tax:
    €1.46
      Compare
  9. Qwiic JST Connector - SMD 4-pin

    714417 Qwiic JST Connector - SMD 4-pin

    Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to creafalse
    Excl. Tax:
    €0.90
    Incl. Tax:
    €1.10
      Compare

Price Match



* Required Fields