713266 SparkFun Thermocouple Breakout - MAX31855K

SparkFun Thermocouple Breakout - MAX31855K

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible.
Categories
Prices are VAT included
€18.79 Price
€15.40 + VAT

 

Details

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a ‘hot’ end and a ‘cold’ one). Once this is achieved, a voltage potential is formed and current flows. The SparkFun Thermocouple Breakout takes a standard Type-K thermocouple in one end, digitizes the temperature measured and sends that data out the other end via a SPI interface, thereby interpreting the data and translating it for you to read!

With the SparkFun Thermocouple Breakout, the thermocouple’s hot junction can be read from -200°C to +700°C with an accuracy of ±2°C while the cold junction, inside the MAX31855K, can only range from -20°C to +85°C while maintaining ±2°C accuracy. The MAX31855K constantly measures the temperature of the cold junction using an internal temperature-sensing diode. The MAX31855K requires a power source from +3.0V to +3.6V (+3.0V nominal) and only draws 1.5mA maximum.

The Thermocouple Breakout is designed to accept a standard thermocouple connector, for convenience and compatibility with probes you may already own. These connectors aren’t necessary, and you could solder a thermocouple directly into the through holes labeled ‘+’ and ‘-’. If you decide to solder the thermocouple directly to the breakout board, it is recommended that the thermocouple be mounted for strain relief to avoid breaking the thin wires. Notches for a zip-tie or wire wrapping have been provided in the PCB opposite the header for this purpose.

Features:

  • 14-bit Resolution
  • SPI-Compatible, Serial Interface
  • -200°C to +700°C Temperature Reading with ±2°C Accuracy
  • 3.0V to 3.6V (+3.0V nominal) Required
  • Accepts Type-K Thermocouple

Documents:

Specifications

Part. No. : SEN-13266

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on SparkFun Thermocouple Breakout - MAX31855K

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Thermocouple Connector - PCC-SMP-K

    713612 Thermocouple Connector - PCC-SMP-K

    This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB.
    Excl. Tax:
    €4.89
    Incl. Tax:
    €5.97
      Compare
  2. Thermocouple Type-K - Stainless Steel SEN-13715

    713715 Thermocouple Type-K - Stainless Steel SEN-13715

    This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, confalse
    Excl. Tax:
    €5.55
    Incl. Tax:
    €6.77
      Compare
  3. SparkFun Atmospheric Sensor Breakout - BME280

    713676 SparkFun Atmospheric Sensor Breakout - BME280

    The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature reafalse
    Excl. Tax:
    €18.80
    Incl. Tax:
    €22.94
      Compare