193334 3334 - 57STH56 NEMA-23 Bipolar Stepper with 77:1 Gearbox

3334 - 57STH56 NEMA-23 Bipolar Stepper with 77:1 Gearbox

This powerful bipolar stepper with a rear shaft and a planetary gearbox has a 0.023° step angle and 240 kg·cm of torque at low speeds.
Categories
Prices are VAT included
€115.16 Price
€94.39 + VAT

 

Details

This NEMA-23 motor has an integrated Planetary gearbox with a 
76 49/64 :1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.

When connected to a 1067 - PhidgetStepper Bipolar HC, the 3334 has a maximum speed of 25 RPM. At the output of the gearbox, the step angle approximately 0.023°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox reduction ratio.


At 2.8 Amps, this stepper motor can produce a maximum torque of 960 kg-cm. However, the gearbox is only rated for 240 kg-cm of continuous torque. Loading this gearbox stepper beyond the torque rating of the gearbox will shorten its useful life.

Motor Controller and Connection

The 3334 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.

The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.


Wire Color Black Green Red Blue
Board Connector A B C D

Note: Make sure to unplug the power cord from the motor controller before switching wires around.


The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.

Motor Properties

Motor Type Bipolar Stepper
Manufacturer Part Number 57STH56-2804B / 56JXS300K77
Step Angle 0.023°
Step Accuracy ± 5 %
Holding Torque 240 kg·cm
Rated Torque 240 kg·cm
Maximum Speed (w/1067 Motor Controller) 25 RPM
Acceleration at Max Speed 
(w/1067 Motor Controller)
1E+06 1/16 steps/sec²

Electrical Properties

Recommended Voltage 12 V DC
Rated Current 2.8 A
Coil Resistance 900 mΩ

Physical Properties

Shaft Diameter 12 mm
Rear Shaft Diameter 3.9 mm
Mounting Plate Size NEMA - 23
Weight 1.5 kg
Number of Leads 4
Wire Length 300 mm

Gearbox Properties

Gearbox Type Planetary
Gear Ratio 76 4964 : 1
Backlash Error 12°
Maximum Strength of Gears 240 kg·cm
Shaft Maximum Axial Load 100 N
Shaft Maximum Radial Load 250 N


Resources
 

Warning 

Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.

Specifications

Part. No. : 3334
NEMA : 23
WINDING : Bipolar
Shaft Diam. mm : 12

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on 3334 - 57STH56 NEMA-23 Bipolar Stepper with 77:1 Gearbox

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. 3331 - 57STH56 NEMA-23 Bipolar Gearless Stepper

    193331 3331 - 57STH56 NEMA-23 Bipolar Gearless Stepper

    This high-speed bipolar stepper with a rear shaft has a 1.8° step angle and 11 kg·cm of torque at low speeds.
    Excl. Tax:
    €25.54
    Incl. Tax:
    €31.16
      Compare
  2. 3531 - Optical Rotary Encoder HKT22

    193531 3531 - Optical Rotary Encoder HKT22

    This low-cost encoder is designed to fit on the rear shaft of our stepper motors. Measure the rotation of your motor even whefalse
    Excl. Tax:
    €31.02
    Incl. Tax:
    €37.84
      Compare
  3. 3339 - Stepper Mounting Bracket (NEMA 23)

    193339 3339 - Stepper Mounting Bracket (NEMA 23)

    Fix a NEMA-23 sized motor or 56mm gearbox to a flat surface with this steel mounting bracket.
    Excl. Tax:
    €5.43
    Incl. Tax:
    €6.62
      Compare
  4. Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

    120349 Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

    This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has false
    Excl. Tax:
    €37.20
    Incl. Tax:
    €45.38
      Compare