Details
The Teensy is an amazing development platform that allows you to get more computing power than an Arduino Uno, and in less space. The Teensy 3.1 XBee Adapter allows you to connect your Teensy with the tried and true XBee series to provide you with a great solution to any project that requires a decently ranged no-frills wireless serial link.
Not only does the Teensy 3.1 XBee Adapter connect a XBee and Teensy together, it also acts as a breakout board for both. Each pin on the Teensy and XBee has been broken out to standard 0.1" spaced through hole soldering points that allow you to connect any additional parts that you would like to incorporate with the adapter.
Though the adapter design interfaces best with the Teensy 3.1, the Teensy LC can be utilized as well. Paired with the XBee you can get a great long distance serial connection, and with the 72MHz of processing speed (48MHz for the Teensy-LC) you can do a lot with the information.
Note: The only headers pre-soldered onto this board as the ones designed to attach your XBee. Additional headers and wires to hook up your Teensy, breadboard, additional circuits, etc will need to be purchased separately.
Documents:
Specifications
Part. No. : | BOB-13311 |
Related Products
-
550010 XBee Series 1 - Wire antenna
The XBee OEM RF module is a ZigBee/IEEE 802.15.4 compliant solution that satisfies the unique needs of low-cost, low-power wifalse -
550011 XBee Series 1 - Chip Antenna
The XBee OEM RF module is a ZigBee/IEEE 802.15.4 compliant solution that satisfies the unique needs of low-cost, low-power wifalse -
550012 XBee PRO Series 1 - Chip antenna
The XBee OEM RF module is a ZigBee/IEEE 802.15.4 compliant solution that satisfies the unique needs of low-cost, low-power wifalse -
550027 XBee PRO Series 2 - Chip antenna
XBee Series 2 Personal Area Network (PAN) RF products are full-featured data radios that combine the features of ZigBee with false -
550026 XBee PRO Serie 2C - Wire antenna
XBee Series 2C Personal Area Network (PAN) RF products are full-featured data radios that combine the features of ZigBee withfalse -
710116 Arduino Fio
The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad. Funnel is afalse -
808645 Teensy 3.2 - with Header Pins
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse -
808646 Teensy LC - with Header Pins
Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cofalse