The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor.
|Operating Voltage||2.3v to 5.0v|
|Operating Current||6uA (typical)|
|Output||10.0 mV/°C (typical)|
|Output Voltage at 0°C||500mV|
|Range||40°C to +125°C|
|Accuracy||±1°C (typ.) ±2°C (max.), 0°C to +70°C|
The TSA01 should be connected to your controller using shielded twin core cable.
The shield is the 0v ground connection.
One of the cores carries the supply voltage, marked as 5v on the PCB.
The other core carries the temperature voltage, marked as T on the PCB.
Do not power the module from a higher voltage as there are ESD protection diodes on the board that start conducting at around 6v.
We do not supply a enclosure for these, however you do have a couple of choices.
The module is designed to fit a Schneider NSYTBS775 enclosure (RS 2550359430).
If you have access to a 3D printer then you may print your own case from the following STL files.
|Part. No. :||TSA01|
Questions on TSA01- Analog Temperature Sensor
No questions asked yetRegister or Login to ask a question.
Excl. Tax:€5.47Incl. Tax:€6.67