-
Home
- 342586
Details
This simple board breaks out all five pins of a USB Micro-B connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1″ connectors
This board breaks out the VBUS, GND, D-, D+, and ID pins of a USB Micro-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB differential data signals. Each of these pins, along with the ID pin, are broken out into a 1×5 row of 0.1″-spaced pins on the board. The included 1×5 straight male header can be soldered to these pins to allow the board to be used with standard perfboards, solderless breadboards, and 0.1″ connectors.
This tiny unit measures only 0.35″ × 0.6″ (0.4″ × 0.6″ including its USB Micro-B connector) and has two 0.086″ diameter semi-circular cutouts for mounting with #2 or M2 screws.
Specifications
Part. No. : | 2586 |
Interface : | n/a |
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.
- Arduino
- Teensy (Arduino)
- Automazione
- Grove (Arduino)
- Raspberry PI
- Electronics
- Educational
- Sockets, Strips & Jumpers
- Cables
- Embedded Linux
- Phidgets
- Microcontrollers
- Boards
- Voice and Sound
- Sensors
- IoT
- Communication
- Radio & Wireless
- Display & LED
- Imaging
- Robot Kits
- Mechanics and Materials
- MakerBeam
- DYNAMIXEL Servos
- Servos
- Motors
- Gearmotors
- Stepper Motors
- Motor & Servo Controllers
- Energy
- Instruments
- Tools
- Software
- Books
- Garage Sale
Excl. Tax:
€16.50
Incl. Tax:
€20.13
|
ETH484-B - ETH484-B - 4 x 16A ethernet relay Excl. Tax:
€69.50
Incl. Tax:
€84.79
|
You have no items to compare.