This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.
The FTDI cable is designed around an FT232, which is housed in a USB-A connector. The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Brown), TX (Tan-like/Peach), VCC (Red), and GND (Black). A link to the FTDI drivers can be found in the Documents section below.
|Part. No. :||CAB-12977|
Excl. Tax:€9.64Incl. Tax:€11.76