The HUB0001 is a drop-in replacement for the HUB0000, supported by Phidget22 version 1.8 or newer.
HUB0001 will enable data rate increases of up to 10x for future generations of VINT devices.
The VINT Hub is one of the most commonly used Phidgets. Connect up to 6 devices to your computer through a single USB port.
Each VINT port can perform one of four roles:
- Communicate with an intelligent VINT Device
- Read a 0-5V Voltage or ratiometric sensor
- Act as a digital output
- Read switches as a digital input
- The mode of each port is set in your program, allowing for flexible use in projects.
- Plug and Program - Device is automatically discovered by the Phidget API when attached
- Pulse Width Modulation Enabled - Ports in DigitalOutput mode support PWM, useful for dimming LEDs and other simple components
- Analog Sensor compatible - Each port is backward compatible with both ratiometric and non-ratiometric Phidget analog sensors
- USB Voltage Supply - Each port has a power and ground pin providing direct access to the USB voltage supply
- Improved Performance on newer VINT devices:
Six Versatile I/O Ports
With a VINT Hub Phidget, you can interface six devices to your computer through a single USB port. Each VINT port can perform one of four roles: Communicating with an intelligent VINT Device, reading a 0-5V Voltage or ratiometric sensor, acting as a digital output, or reading switches as a digital input. Each port has a power and ground pin, so you can also use the ports to gain access to the USB voltage supply directly.
Plug in one of our many VINT-enabled Phidgets that perform a wide variety of functions. Control motors and LEDs, measure temperature or motion, or build a large scale system with many inputs and outputs.
Easy to Use
VINT Devices are 'plug and program': automatically discovered by the Phidget API with the same ease of programming you've come to expect from Phidgets. Each VINT device has a full API with functions and events to make programming a snap.
Analog Sensor Compatible
Sometimes, you just need a few simple analog voltage sensors. Luckily, your collection of Phidget Analog Input sensors is not obsolete; each port on the USB VINT Hub can interface a 0-5V sensor. The VINT Port is backwards compatible with both ratiometric and non-ratiometric Phidget analog sensors.
Digital I/O Mode
In digital output mode, a VINT port can be used to drive LEDs, relays, digital circuits, and other simple electronics. Each port is PWM-enabled, allowing you to dim LEDs to a specific brightness.
Wire a switch or sensor contact directly into a VINT Port, and use the Digital Input mode to read the state of the switch.
If you need more than six inputs or outputs, you can expand by attaching a VINT I/O module. For example, there are VINT digital output modules with 16 outputs, allowing 96 digital outputs on a single VINT HUB Phidget! See the "Compatible Products" tab for a list of modules.
|Controlled By||USB (Mini-USB)|
|Number of VINT Ports||6|
|USB Voltage Min||4.5 V DC|
|USB Voltage Max||5.3 V DC|
|USB Speed||Full Speed|
|Current Consumption Min||30 mA|
|Available External Current||470 mA|
|Voltage Input Resolution||* 16 bit|
|Sensor Input Impedance||324 kΩ|
|Input Voltage Min (DC)||0 V DC|
|Input Voltage Max (DC)||5.3 V DC|
|Voltage Input Noise||** ± 500 μV DC|
|Sampling Interval Max||60 s/sample|
|Number of Voltage Inputs||6 (Shared)|
|Sampling Interval Min||1 ms/sample|
|Pull-up Resistance||200 kΩ|
|Low Voltage Max (True)||1 V DC|
|High Voltage Min (False)||2 V DC|
|Low Voltage Trigger Length Min||3 ms|
|High Voltage Trigger Length Min||3 ms|
|Digital Input Voltage Max||5.5 V DC|
|Digital Input Type||Switch (Active Low)|
|Number of Digital Inputs||6 (Shared)|
|Series Resistance||510 Ω|
|Digital Output Available Current||8.1 mA|
|Digital Output Voltage Min||0 V DC|
|Digital Output Voltage Max||3.3 V DC|
|PWM Frequency Max||50 kHz|
|PWM Resolution||0.8 %|
|Number of Digital Outputs||6 (Shared)|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||85 °C|
|Canadian HS Export Code||8471.80.00|
|American HTS Import Code||8471.80.40.00|
|Country of Origin||CN (China)|
* Voltage measured with a 12-bit ADC, oversampled to 16-bits.
** At a data interval of 4ms. Noise will decrease as data interval increases.
|Part. No. :||HUB0001|
|VINT Type :||HUB|
191017 1017 - PhidgetInterfaceKit 0/0/8The PhidgetInterfaceKit 0/0/8 provides Small Signal Relays with 8 Relay Outputs, rated at 250VAC, or 2 Amps, for a maximum offalseExcl. Tax:€98.45Incl. Tax:€120.11
193002 3002 - Phidget Cable 60cmCavo Phidgets per connettere il sistema VINTExcl. Tax:€3.10Incl. Tax:€3.78
193004 3004 - Phidget Cable 350cmCavo Phidgets per connettere il sistema VINTExcl. Tax:€4.20Incl. Tax:€5.12
199003 Isolated 12-bit Voltage Output PhidgetProduce a voltage from -10 to +10 volts with this isolated voltage output module.Excl. Tax:€30.00Incl. Tax:€36.60
199009 4x Isolated Digital Input PhidgetAdd 4 isolated active-high digital inputs to your hub at the cost of only one VINT port.Excl. Tax:€19.80Incl. Tax:€24.16
199010 16x Isolated Digital Input PhidgetAdd 16 isolated active-high digital inputs to your hub at the cost of only one VINT port.Excl. Tax:€49.00Incl. Tax:€59.78
199012 2.5A Stepper PhidgetIf you're looking for a compact solution for controlling a medium-sized stepper motor, the STC1001 is an affordable and convefalseExcl. Tax:€41.40Incl. Tax:€50.51
193003 3003 - Phidget Cable 10cmCavo Phidgets per connettere il sistema VINTExcl. Tax:€2.10Incl. Tax:€2.56
204104 CBL4104 - Phidget Cable 30cmCavo Phidgets per connettere il sistema VINTExcl. Tax:€2.30Incl. Tax:€2.81
204105 CBL4105 - Phidget Cable 90cmCavo Phidgets per connettere il sistema VINTExcl. Tax:€2.60Incl. Tax:€3.17
204106 CBL4106 - Phidget Cable 150cmCavo Phidgets per connettere il sistema VINTExcl. Tax:€3.20Incl. Tax:€3.90
205000 Wireless VINT HubVINT HUB versione WiFi, puo' essere connesso anche con cavo Ethernet. I dispositivi Phidgets connessi a questo HUB sono a disfalseExcl. Tax:€63.00Incl. Tax:€76.86
211126 1126 - Differential Air Pressure Sensor ± 25kPaSensore di pressione differenziale, misura da –25kPa a +25 kPa. Compatibile con il sistema VINTExcl. Tax:€31.50Incl. Tax:€38.43