550027 XBee PRO Series 2 - Chip antenna

XBee PRO Series 2 - Chip antenna

XBee Series 2 Personal Area Network (PAN) RF products are full-featured data radios that combine the features of ZigBee with mesh and the unparalleled flexibility of the XBee product family
Prices are VAT included
€43.60 Price
€35.74 + VAT




DIGI Part #: XBP24CZ7PIT-004

XBee Series 2 Personal Area Network (PAN) RF products are full-featured data radios that combine the features of ZigBee with mesh and the unparalleled flexibility of the XBee product family. They incorporate the latest dynamic self-healing and self-discovery functionality, low-power sleep modes, and multiple interface options (modules, adapters, gateways), to enable cost-effective and robust end-to-end wireless connectivity to local and remote infrastructure.


The XBee Series 2 OEM RF module is a ZigBee/IEEE 802.15.4 compliant solution that satisfies the unique needs of low-cost, low-power wireless sensor networks. The modules are easy-to-use, require minimal power and provide reliable delivery of critical data between devices. Its small form factor saves valuable board space. The XBee module operates within the ISM 2.4 GHz frequency band and is pin-for-pin compatible with MaxStream's XBee and XBee-PRO Zigbee Module. The modules are optimized for use in US, Canada, Australia, Israel and Europe. No configuration is necessary for out-of-box RF communications. The module’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple AT commands.

Product summary:

  • ISM 2.4 GHz operating frequency
  • 1 mW (0 dBm) power output (up to 100m range)
  • U.FL. RF Connector, RPSMA, Chip or Whip antenna options
  • Industrial (-40 – 85° C) temperature rating
  • Approved for use in the United States, Canada and Europe
  • Advanced networking & low-power modes supported

ZigBee is a wireless technology developed as an open global standard to address the unique needs of low-cost, low-power, wireless sensor networks. The standard takes full advantage of the IEEE 802.15.4 physical radio specification and operates in unlicensed bands worldwide at the following frequencies: 2.400–2.484 GHz, 902-928 MHz and 868.0–868.6 MHz. The 802.15.4 specification was developed at the Institute of Electrical and Electronics Engineers (IEEE). The specification is a packet-based radio protocol that meets the needs of low-cost, battery-operated devices. The protocol allows devices to intercommunicate and be powered by batteries that last years instead of hours. The ZigBee protocol carries all the benefits of the 802.15.4 protocol with added networking functionality.


The ZigBee Protocol

The ZigBee protocol was engineered by the ZigBee Alliance, a non-profit consortium of leading semiconductor manufacturers, technology providers, OEMs and end-users worldwide. The protocol was designed to provide OEMs and integrators with an easy-to-use wireless data solution characterized by low-power consumption, support for multiple network structures and secure connections.

The ZigBee Advantage

The ZigBee protocol was designed to carry data through the hostile RF environments that routinely exist in commercial and industrial applications.

ZigBee protocol features:

  • Low duty cycle - Provides long battery life
  • Low latency
  • Support for multiple network topologies: Static, dynamic, star and mesh
  • Direct Sequence Spread Spectrum (DSSS)
  • Up to 65,000 nodes on a network
  • 128-bit AES encryption – Provides secure connections between devices
  • Collision avoidance
  • Link quality indication
  • Clear channel assessment
  • Retries and acknowledgements
  • Support for guaranteed time slots and packet freshness

Secure Connections

The ZigBee specification provides a security toolbox approach to ensuring reliable and secure networks. Access control lists, packet freshness timers and 128-bit encryption based on the NIST Certified Advanced Encryption Standard (AES) help protect transmitted data.

ZigBee Applications

ZigBee enables broad-based deployment of wireless networks with low-cost, low-power solutions. It provides the ability to run for years on inexpensive batteries for a host of monitoring applications: Lighting controls, AMR (Automatic Meter Reading), smoke and CO detectors, wireless telemetry, HVAC control, heating control, home security, Environmental controls, drapery and shade controls, etc.

Standard ZigBee™

Transmission Range (meters)

1 – 100*
1 - 100
1 – 10

Battery Life (days)

100 – 1,000
0.5 – 5.0
1 - 7

Network Size (# of nodes)

> 64,000


Monitoring & Control
Web, Email, Video
Cable Replacement

Stack Size (KB)

4 – 32

Throughput kb/s)

20 – 250

* MaxStream’s XBee-PRO Module yields 2 – 3x the range of standard ZigBee Modules (up to 1200 meters).

Use Case Scenario

It is 4:00 a.m. on a farm in Iowa. Sensors distributed throughout the fields report the moisture content in the soil and humidity of the air. The staff on the farm uses this data to decide where and when to water for optimum effect. The information also serves as an early warning system for environmental issues such as frost. Precious resources are used more efficiently and productivity increases.

The sensors distributed in the field are interconnected in a “mesh” network. If a sensor node goes down, the network is self-healing; the nodes are able to connect with one another dynamically, finding another route to stay connected within the network.

Mesh Networks

A key component of the ZigBee protocol is the ability to support mesh networks. In a mesh network, nodes are interconnected with other nodes so that at least two pathways connect each node. Connections between nodes are dynamically updated and optimized in difficult conditions. In some cases, a partial mesh network is established with some of the nodes only connected to one other node.

Mesh networks are decentralized in nature; each node is self-routing and able to connect to other nodes as needed. The characteristics of mesh topology and ad-hoc routing provide greater stability in changing conditions or failure at single nodes.

MaxStream XBee & XBee-PRO Modules

MaxStream is a member of the ZigBee Alliance and has developed OEM solutions based on the ZigBee architecture. The XBee and XBee-PRO modules provide an easy-to-implement solution and a powerful boost to range and reliability to companies looking to offer ZigBee



Part. No. : XBP24CZ7PIT-004

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on XBee PRO Series 2 - Chip antenna

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. XBee - USB Board

    990002 XBee - USB Board

    The XBee - USB Board has been designed to allow an easy and reliable connection between the Xbee�s modules and PC.
    Regular Price:
    Excl. Tax:
    Incl. Tax:
  2. XBee - Simple Board

    990001 XBee - Simple Board

    The XBee - Simple Board has been designed to allow an easy and reliable connection between the Xbee’s modules and your applfalse
    Regular Price:
    Excl. Tax:
    Incl. Tax:
  3. XBee DTE Serial Board

    990006 XBee DTE Serial Board

    This is a DTE (Data Terminal Equipment) serial module, it means you can connect this device to any DCE (Data Communication Eqfalse
    Regular Price:
    Excl. Tax:
    Incl. Tax:
  4. 10pin 2mm header - Red

    315016 10pin 2mm header - Red

    10 pin 2mm pitch header suitable for XBee or GPS modules.
    Excl. Tax:
    Incl. Tax:
  5. Excl. Tax:
    Incl. Tax:
  6. XBee Explorer Dongle

    711697 XBee Explorer Dongle

    This is the XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit direfalse
    Excl. Tax:
    Incl. Tax:
  7. XBee Explorer USB

    711812 XBee Explorer USB

    This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the false
    Excl. Tax:
    Incl. Tax: