Dettagli
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 10:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 1300 RPM and 40 mA free-run, 2 oz-in (0.2 kg-cm) and 0.36 A stall.
These tiny, high-quality motors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and offer a choice between two different motors: high-power (HP) and standard. With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change. Please see the micro metal gearmotor comparison table for detailed specifications of all our micro metal gearmotors. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application.
Some versions of the gearmotors are sold with an additional 1mm-diameter output shaft that protrudes from the rear of the motor. This 4.5mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add a custom-built encoder to provide motor speed or position feedback.
Dimensions
The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). It weighs approximately 0.35 oz (10 g). Dimensions in mm:
Dimensions
Size: | 24 x 10 x 12 mm |
---|---|
Weight: | 0.34 oz |
Shaft diameter: | 3 mm |
General specifications
Gear ratio: |
10:1 |
---|---|
Free-run speed @ 6V: | 1300 rpm |
Free-run current @ 6V: | 40 mA |
Stall current @ 6V: | 360 mA |
Stall torque @ 6V: | 2 oz·in |
Extended motor shaft?: | N |
Questions on 1099 - Pololu 10:1 Micro Metal Gearmotor
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
270026 Ruote Pololu Wheel 32x7mm Coppia - Bianche
Misurano 32mm di diametro, si adattano direttamente ai micromotoriduttori Sanyo e simili. Vendute in coppia -
270027 Supporti Pololu Micro Metal Gearmotor Bracket Coppia - Nero
Coppia staffe in plastica per motoriduttori in miniatura Sanyo e simili. -
341093 1093 - Pololu 30:1 Micro Metal Gearmotor HP
Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse -
340992 992 - Pololu 100:1 Micro Metal Gearmotor
Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse -
340998 998 - Pololu 50:1 Micro Metal Gearmotor HP
Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse -
582512 298:1 Micro Metal Gearmotor HP
Micromotoriduttore in metallo rapporto di riduzione 298:1, versione HP (high-power) -
341162 2361 - 75:1 Micro Metal Gearmotor HP
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 75.81:1 metal gearbox,false -
342377 2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft
This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sfalse -
341163 1163 - 73:1 Metal Gearmotor 20Dx42L mm
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 73:1 metal gearbox with a 0.2false