The 1129 is a capacitive touch sensor and can detect a touch through plastic, glass, or paper. We recommend a material thickness of up to 1/2”.
The sensor can work as a close proximity sensor, sensing objects at a distance of up to 1/2” from the board in all directions without direct contact.
On the bottom side of the Touch Sensor there is a small exposed metallic pad. A soldered connection can be made to the pad to increase the size and dimensions of the touchable area, such as attaching the sensor to a metallic object or some wire.
This sensor is designed to be 3.3V compatible and can interface with other products as an alternative. For example, the Java based Sentilla Perk includes side ports that are compatible with 3.3V Phidget sensors without any modifications.
This particular revision of the 1129 has a new sensing chip that recalibrates after 45 seconds of contact (as opposed to 60 seconds on the previous revision). Other than that, this sensor will function the same as its predecessor.
Comes packaged with
- 3002 – 60cm Sensor Cable
- Capacitive touch sensor that can detect a touch through plastic, glass, or paper.
- We recommend a material thickness of up to 1/2”.
- The sensor can be attached to metallic objects to allow for a larger touch pad.
- Connects to any device with an Analog Input.
|Sensor Type||Touch (Capacitive)|
|Sensor Output Type||Ratiometric|
|Detecting Distance Max||12.7 mm|
|Current Consumption Max||500 μA|
|Output Impedance||1 kΩ|
|Supply Voltage Min||4.3 V DC|
|Supply Voltage Max||5.3 V DC|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||85 °C|
Questions on 1129 - Touch sensor
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
Tasse escluse:€ 136,70IVA inclusa:€ 166,77
Tasse escluse:€ 8,16IVA inclusa:€ 9,96
Tasse escluse:€ 6,53IVA inclusa:€ 7,97
Tasse escluse:€ 8,64IVA inclusa:€ 10,54
Tasse escluse:€ 7,58IVA inclusa:€ 9,25