The 1142 Light sensor can measure ambient light up to 1000 lux (roughly equivalent to the typical lighting in a studio, or the sky on an overcast day). Each sensor has been individually calibrated, and a label has been applied to the back of the board with a calibration value which can be used in your calculations to increase measurement accuracy.
Some light sensors report drastically different values depending on the type of light being detected. The 1142 light sensor, however, only differs by a factor of 1.2 when measuring fluorescent light versus incandescent.
If you need a larger measurement range, take a look at the 1143 – Light Sensor 70,000 lux.
- 3002 – 60cm Sensor Cable
- Measures up to 1000 lux
- Measures both incandescent and fluorescent light
- Indivudually calibrated for maximum accuracy
- Connects to any device with an Analog Input.
|Sensor Output Type||Non-Ratiometric|
|Response Time Max||2 ms|
|Peak Sensitivity Wavelength||625 nm|
|Light Level Min||1 lx|
|Light Level Max (5V)||1 klx|
|Light Current Ratio||1.2|
|Output Impedance||1 kΩ|
|Supply Voltage Min||2.4 V DC|
|Supply Voltage Max||5.5 V DC|
|Current Consumption Max||5 mA|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||85 °C|
|Part. No. :||1142|
Questions on 1142 - Light Sensor 1000 lux
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
Tasse escluse:€ 7,43IVA inclusa:€ 9,06