Dettagli
This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1000 mA at 2.7 V, allowing for a holding torque of 1400 g-cm (20 oz-in). The motor has four color-coded wires terminated with bare leads.
Our 5mm universal mounting hub (see related products) can be used to mount objects on the stepper motor’s 5mm-diameter output shaft.
Specifications
- Size: 35 mm square x 36 mm, not including the shaft (NEMA 14)
- Weight: 180 g (6 oz)
- Shaft diameter: 5 mm
- Steps per revolution: 200
- Current rating: 1000 mA per coil
- Voltage rating: 2.7 V
- Resistance: 2.7 Ohm per coil
- Holding torque: 1400 g-cm (20 oz-in)
- Inductance: 4.3 mH per coil
- Lead length: 12 in
Dimensions
The following diagram shows the stepper motor dimensions in mm. The dimension labeled “length” is 36 mm. The output shaft has a length of 21 mm and a diameter of 5 mm.
Specifiche
NEMA : | 14 |
WINDING : | Bipolar |
Diam. Asse mm : | 5 |
Questions on 1209 - Motore Stepper bipolare NEMA-14 35x36mm
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
191062 1062 - PhidgetStepper Unipolar 4-Motor
La Scheda PhidgetStepper Unipolar consente di controllare la posizione, velocita' e accelerazione di 4 motori Stepper (passo-false -
342257 Pololu Stamped Aluminum L-Bracket for NEMA 14 Stepper Motors
This black anodized aluminum bracket lets you securely mount typical NEMA 14-size stepper motors to your project. The bracketfalse -
341081 Pololu Universal Aluminum Mounting Hub for 4mm Shaft, #4-40 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 4 mm diameter motor shafts. The setfalse -
341138 1138 - Pololu 20D mm Metal Gearmotor Bracket Pair
These aluminum gearmotor brackets let you securely mount Pololu’s 29:1, 73:1, and 154:1 20D mm metal gearmotors to your project.