Salta il contenuto

Lingua

SKU 201101

16x Isolated Solid State Relay Phidget

Esaurito
Prezzo originale €64,05 - Prezzo originale €64,05
Prezzo originale
€64,05
€64,05 - €64,05
Prezzo attuale €64,05

Tutti i prezzi sono IVA inclusa

Disponibilità:
Esaurito
Richiesta Sconto per Quantita' e Informazioni

For applications that require a ton of outputs, this module is the one you're looking for. With sixteen PWM-enabled relay outputs, it can be used to control devices and switch circuits of up to 30V volts and 8 amps. LED strips, DC motors, power relays, fans and other small circuits are all common loads for this type of output. The REL1101 connects to a port on a VINT Hub. See the Connection & Compatibility tab for a list of hubs.

Externally Powered

Instead of providing power to the device, a solid state relay output switches the circuit to ground and completes the circuit when you want to switch it on. The power is supplied externally and should be connected in series with the load and the relay output. Each channel has a ground terminal beside it to make wiring a snap, and each one leads to a common ground.

PWM Switching

In addition to switching at microsecond speeds, each relay output is also capable of pulse-width modulation; rather than simply switching on or off, you can select a percentage duty cycle to limit the power being supplied to a specific level. This allows you to control devices like a dimmer would, which is an important feature for LEDs, fans, and motors. Check the datasheet for your device to ensure that it is designed to be used with PWM (some devices such as incandescent or CF bulbs are not designed for dimming).

Isolated for Stability

The VINT port on this board is electrically isolated from the rest of the board, improving stability by eliminating ground loops.

Product Specifications

Board Properties
Controlled By VINT
Current Consumption Min 4 mA
Current Consumption Max 45 mA
Relay Properties
Number of Relays 16
Contact Resistance Max 35 mΩ
Turn-off Time Max 100 ns
Switch Type Low Side MOSFET Switch
Turn-on Time Max 100 ns
PWM Frequency Max 28.5 kHz
PWM Resolution 0.5 %
Electrical Properties
Load Current Max (DC) 8 A
Load Voltage Max (DC) 30 V DC
Switching Power Max (Real) * 240 W
Physical Properties
Recommended Wire Size 16 - 26 AWG
Operating Temperature Min -40 °C
Operating Temperature Max 85 °C

* Note: At switching powers powers higher than 50W, external cooling may be required. For high power applications, a hockey-puck style SSR may be more appropriate. See the "Other Relays" tab for more details.

User Guide