Dettagli
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket.
This lightweight (about 15 g) but strong bracket is made from 3mm-thick black anodized aluminum and is specifically designed to work with the typical faceplate mounting holes of NEMA 17 stepper motors. The slots through which the motor mounts to the bracket allow for 2 mm of play for fine-tuning position, and four 6 mm M3 screws are included for securing the motor to the bracket (note: these M3 screws work with all of the NEMA 17 stepper motors we carry; different screws might be required when using this bracket with stepper motors from other suppliers). The other side of the bracket includes a variety of slots and holes that can be used with #6, #8 and M4 screws.
This bracket makes it easy to mount and integrate NEMA 17 size motors like our stepper motor with lead screw into your project. These brackets also fit the 42×18.6mm Sanyo pancake motor and the 42×11.6mm Sanyo pancake motor, though the two Sanyo motors have short output shafts that will only extend two millimeters past the edge of the bracket.
File downloads
Specifiche
Part. No. : | 2266 |
Questions on 2266 - Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
193338 3338 - Stepper Mounting Bracket (NEMA 17)
Fix a NEMA-17 sized motor or 36mm gearbox to a flat surface with this steel mounting bracket. -
342258 2258 - Steel L-Bracket for NEMA 23 Stepper Motors
The bracket features two slots for various mounting solutions and includes four M4×16mm screws, washers, and nuts for securinfalse -
642676 2676 - Pololu 25D mm Metal Gearmotor Bracket Pair
The brackets are sold in pairs, and each bracket includes two M3 screws for securing the motor to the bracket. Each bracket afalse -
342267 2267 - Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Motore passo passo bipolare, nema 17