Dettagli
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver or one of our Tic Stepper Motor Controllers. In particular, the Tics make control easy because they support six different interfaces (USB, TTL serial, I²C, RC, analog voltages, and quadrature encoder) and are configurable over USB with our free configuration utility.
Specifications
- Size: 42.3 mm square × 38 mm, not including the shaft (NEMA 17)
- Weight: 285 g (10 oz)
- Shaft diameter: 5 mm “D”
- Steps per revolution: 200
- Current rating: 1.68 A per coil
- Voltage rating: 2.8 V
- Resistance: 1.65 Ω per coil
- Holding torque: 3.7 kg-cm (51 oz-in)
- Inductance: 3.2 mH per coil
- Lead length: 30 cm (12″)
- Output shaft supported by two ball bearings
More specifications are available in the datasheet (39k pdf).
Specifiche
Part. No. : | 2267 |
NEMA : | 17 |
WINDING : | Bipolar |
Diam. Asse mm : | 5 |
Questions on 2267 - Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
710846 Motore Passo Passo - NEMA-17 - 48mm - 42BYGHM809
Motore passo passo, form factor NEMA 17, lunghezza 48mm albero escluso. 48N.cm -
193327 3327 - 42STH38 NEMA-17 Bipolar Stepper with 26.85:1 Gearbox
This NEMA-17 motor has an integrated Planetary gearbox with a 26 103/121 :1 ratio. It comes with the rear shaft exposed, so yfalse -
193324 3324 - 42STH38 NEMA-17 Bipolar Gearless Stepper
This affordable bipolar stepper with a rear shaft has a 1.8° step angle and 3.3 kg·cm of torque at low speeds. -
193328 3328 - 42STH38 NEMA-17 Bipolar Stepper with 51:1 Gearbox
This bipolar stepper with a rear shaft and a planetary gearbox has a 0.035° step angle and 48 kg·cm of torque at low speeds. -
342266 2266 - Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project.