Dettagli
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specs at 6 V: 100 RPM and 40 mA with no load, 36 oz-in (2.6 kg-cm) and 0.7 A at stall.
These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.
The HPCB versions (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).
Dimensions
Size: | 10 × 12 × 26 mm |
---|---|
Weight: | 9.5 g |
Shaft diameter: | 3 mm1 |
General specifications
Gear ratio: | 210.59:1 |
---|---|
Free-run speed @ 6V: | 100 rpm |
Free-run current @ 6V: | 40 mA |
Stall current @ 6V: | 700 mA |
Stall torque @ 6V: | 36 oz·in |
Extended motor shaft?: | N |
Motor type: | 0.7A stall @ 6V (MP 6V) |
Notes:
File downloads
Specifiche
Part. No. : | 2369 |
Diam. Asse mm : | 3 |
Questions on 2369 - 210:1 Micro Metal Gearmotor MP 6V
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
342377 2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft
This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sfalse -
342214 2214 - 100:1 Micro Metal Gearmotor HP with Extended Motor Shaft
This gearmotor is a miniature high-power brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mmfalse -
343079 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft
This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has false -
343074 3074 - 75:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft
This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has afalse -
343076 3076 - 150:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft
This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has false -
342370 2370 - 250:1 Micro Metal Gearmotor MP 6V
Micro motoriduttore di media potenza, 6V a spazzole, con un rapporto di 210.59:1 e ingranaggi in metallo. Asse da 3mm a D -
344797 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft
Micromotoriduttore con ingranaggi in metallo, versione HPCB a 6v con asse per encoder. Dotato di spazzole long-life -
344760 4760 - Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Encoder a quadratura per micromotori con asse posteriore sporgente, inclusa versione HPCB -
344761 4761 - Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Encoder a quadratura per micromotori con asse posteriore sporgente, inclusa versione HPCB. Versione con connettore orizzontale